Comcater COMENDA Hi-Line HCXL Series Manuale di istruzioni per l'uso e la manutenzione - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso e la manutenzione per Lavastoviglie Comcater COMENDA Hi-Line HCXL Series. Comcater COMENDA Hi-Line HCXL Series 19.
ENGLISH
1.1 GENERAL DESCRIPTION
Single skin body, stainless steel execution AISI 304.
Single piece deep drawn tank with multiple filtering sy-
stem (pump suction, collection filter and micro-filter) with
presence indicator. Upper and lower stainless steel wash
and rinse arms. Self draining wash pump. Hood activated
cycle start and manual cycle start. removable rack holder.
Self-cleaning cycle at unit switch-off. Upper control panel.
Self draining wash pump. Built in HR drain pump. Electro-
nic adjustment of the detergent and rinse aid dispenser.
1.2
TYPES OF USE AND
CONTRAINDICATIONS
The machines were designed and built to wash dishes in
specific dishracks, using detergent and rinse agent.
•
Objects allowed: glasses, cups, coffee cups, saucers,
silverware, inserted in specific dishracks, made of
material suitable for dishwashers and small enough
for the dishrack and machine.
•
All specific detergents and rinse agents for industrial
dishwashers normally found on the market may be
used.
ATTENTION
A
ny improper use of the machine relieves the manufac-
turer from all liability for accidents to objects or persons
and terminates any warranty conditions.
1.3
TRANSPORT, SHIPPING and
STORAGE (Fig. 2)
-
The machine is normally shipped inside a cardboard
box secured with straps.
-
Use a forklift truck or pallet truck to transport the packed
machine, placing the box on the relative forks
ATTENTION
he machine must exclusively be shipped and stored
T
sheltered against atmospheric agents.
1.4 CONTROLS UPON RECEPTION
When the supply is received, check that the packages are
intact and visually not damaged.
If all is intact, remove the packaging (unless there are
different instructions given by the manufacturer) and
check that the machine is free of any damage caused
during transportation.
Check for any structural damage crushing or breakage.
If any damage or imperfections are found:
1- Immediately notify the carrier either by telephone or
through registered mail,
2- Inform the manufacturer, cc, by registered mail.
IMPORTANT
Any damage or faults must be communicated promptly
and anyhow within 3 days from the data of reception of
the machine.
18
Part 1: Use and safety instructions
1.5 UNPACKING (Figg. 2-3-4)
To remove the machine from the packaging, proceed as
follows:
1. Remove the straps (1) securing the box.
2. Remove the box (2) lifting it upwards.
3. Remove the protective film from the machine.
4. Remove the machine from the base, lifting it from the
bottom of the body.
5. All packaging elements must be collected and not left
in the reach of children as they are sources of danger.
They must be disposed of as solid urban waste
ATTENTION
nce the machine has been unpacked, NEVER lift it
O
from the electric components box.
Lift the machine from the bottom of the body. Place it on
the forks of the forklift truck to transport it.
1.6
MACHINE IDENTIFICATION (Fig. 5)
-
The serial number and relative machine data are written
on the rating plate (3) on the right side of the machine..
IMPORTANT
To
request technical support or to order spare parts, always
include the model and serial number of the machine.
1.7
DESCRIPTION OF SAFETY DEVICES
•
The HC-HCXL models are equipped with a safety
microswitch which blocks the wash pump when the
tank door is accidentally opened.
•
Electric parts closed by panels secured with screws.
•
Electric equipotential earth electrode
1.8
NORMATIVE REFERENCES
•
The machine and its safety devices are built in
compliance with the following standards:
•
Essential safety requirements set forth by directives
2006/42/EEC (MD), 2014/35/EEC (LVD), 2014/30/EEC
(EMC).
•
Requirements set forth by directive 2002/95/EEC
(RoHS).