COMCRAFT HD20-100UTP Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Hardware di rete COMCRAFT HD20-100UTP. COMCRAFT HD20-100UTP 8. Hdx series high density 8/12/16/20 100utp tap

Stampa la pagina

Page 6

3. Installation

Power:

1. Connect power 1 (input) to mains power 1. Power LED 1 will

light.

2. Connect power 2 to mains power 2 (if available). LED 2 will light.*

* The tap works on one power but no power backup will be

obtained.

Cable Configuration:

Network port A: to DCE by a Straight Cable / to DTE by a Cross-

Over Cable

Network port B: to DTE by a Straight Cable / to DCE by a Cross-

Over Cable

Tap Port A:

to Monitor Device A by a Straight Cable

Tap Port B:

to Monitor Device B by a Straight Cable

TAP port A mirrors data received in Port A, TAP port B mirrors data

received in Port B.

Note: The maximum length between any of the connected devices

should not exceed 95mtr.

Cable requirements: 22-24 AWG unshielded twisted pair, CAT 5E

or better.

L A N & W A N T E S T E Q U I P M E N T