COMCRAFT HD20-100UTP Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Сетевое оборудование COMCRAFT HD20-100UTP. COMCRAFT HD20-100UTP 8 страниц. Hdx series high density 8/12/16/20 100utp tap
Печатать страницуPage 6
3. Installation
Power:
1. Connect power 1 (input) to mains power 1. Power LED 1 will
light.
2. Connect power 2 to mains power 2 (if available). LED 2 will light.*
* The tap works on one power but no power backup will be
obtained.
Cable Configuration:
Network port A: to DCE by a Straight Cable / to DTE by a Cross-
Over Cable
Network port B: to DTE by a Straight Cable / to DCE by a Cross-
Over Cable
Tap Port A:
to Monitor Device A by a Straight Cable
Tap Port B:
to Monitor Device B by a Straight Cable
TAP port A mirrors data received in Port A, TAP port B mirrors data
received in Port B.
Note: The maximum length between any of the connected devices
should not exceed 95mtr.
Cable requirements: 22-24 AWG unshielded twisted pair, CAT 5E
or better.
L A N & W A N T E S T E Q U I P M E N T