Bosch DISHWASHER Manuale di istruzioni per l'installazione - Pagina 17

Base and Toe Panel/ Final Instructions

BASE AND TOE PANEL (Continued)

SHY66 & SHX99A Models Base and Toe Panel Installa-

tion

1) Place the Base Part under and up the front bottom panel

of the dishwasher, as shown in Figure 31.

2) Insert the Base Part screws (Figure 1, letter O) into the

Base Part, as shown in Figure 31, letter B. Tighten the

Base Part Screws.

3) Place the Cotton Insulation Strip (Figure 1, letter C)

under the unit, between the bottom of the Base Part and

the floor, as shown in Figure 31, letter C.

4) Place the toe panel over the Cotton Insulation Strip, and

use the toe panel screws (Figure 1, letter N) to secure the

toe panel in place, as shown in Figure 31, letter D.

Figure 31

FINAL INSTRUCTIONS

1) Energize the dishwasher power supply circuit.

2) Consult the Dishwasher Use and Care Manual, and run

the dishwasher through one complete cycle.

If the dishwasher does not operate properly, refer to the

Self-Help section of the Use and Care Manual. If the

dishwasher still does not operate properly, refer to the

Customer Service Section of the Use and Care Manual.