Draper 83689 Manuale di istruzioni - Pagina 14
Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Draper 83689. Draper 83689 20. 18v cordless impact wrench
8.
PREPARING THE IMPACT WRENCH
WARNING: If any of the following occurs, unplug the charger from the power supply socket
outlet and replace the battery pack
• None of the indicators lights on anyhow.
Disconnect battery charger from the power supply.
CAUTION: Do not pull the plug out of the power supply by pulling on the cord. Make sure to
grasp the plug when removing from power supply to avoid damaging the cord.
Remove the battery from the battery charger.
Supporting the battery charger with hand, pull out the battery from the battery charger
CAUTION: When the battery charger has been continuously used, the battery charger will be
hot. Once the charging has been completed, give 15 minutes rest until the next charge.
If the battery is charged when it is warm due to battery use or exposure to sunlight, the
battery will not be recharged. In such a case, let the battery cool before charge.
If the red indicator flickers rapidly at 0.2 - second intervals, check for and take out any
foreign objects in the charger's battery slot. If there are no foreign objects, it is probable that
the battery or charger is malfunctioning. Allow battery/charger to normalise and try again. If
a fault remains after trying this then contact Draper Tools.
How to make the batteries perform longer.
Recharge the batteries before they become completely exhausted.
When you feel that the power of the tool becomes weaker, stop using the tool and recharge
the battery. If you continue to use the tool and exhaust the electric current, the battery may
become damaged.
Avoid recharging at high temperatures. A rechargeable battery will be hot immediately after
use. If such a battery is recharged immediately after use, its internal chemical substance will
deteriorate, and the battery life will be shortened. Leave the battery and recharge it after it
has cooled for a while.
14