Draper 83689 사용 설명서 - 페이지 14

{카테고리_이름} Draper 83689에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper 83689 20 페이지. 18v cordless impact wrench

PREPARING THE IMPACT WRENCH

WARNING: If any of the following occurs, unplug the charger from the power supply socket

outlet and replace the battery pack

• None of the indicators lights on anyhow.

Disconnect battery charger from the power supply.

CAUTION: Do not pull the plug out of the power supply by pulling on the cord. Make sure to

grasp the plug when removing from power supply to avoid damaging the cord.

Remove the battery from the battery charger.

Supporting the battery charger with hand, pull out the battery from the battery charger

CAUTION: When the battery charger has been continuously used, the battery charger will be

hot. Once the charging has been completed, give 15 minutes rest until the next charge.

If the battery is charged when it is warm due to battery use or exposure to sunlight, the

battery will not be recharged. In such a case, let the battery cool before charge.

If the red indicator flickers rapidly at 0.2 - second intervals, check for and take out any

foreign objects in the charger's battery slot. If there are no foreign objects, it is probable that

the battery or charger is malfunctioning. Allow battery/charger to normalise and try again. If

a fault remains after trying this then contact Draper Tools.

How to make the batteries perform longer.

Recharge the batteries before they become completely exhausted.

When you feel that the power of the tool becomes weaker, stop using the tool and recharge

the battery. If you continue to use the tool and exhaust the electric current, the battery may

become damaged.

Avoid recharging at high temperatures. A rechargeable battery will be hot immediately after

use. If such a battery is recharged immediately after use, its internal chemical substance will

deteriorate, and the battery life will be shortened. Leave the battery and recharge it after it

has cooled for a while.