Draper CSM355 Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Sega Draper CSM355. Draper CSM355 16. 355mm dry metal cutting saw

Stampa la pagina

POWER SUPPLY

CONNECTING YOUR MACHINE TO THE POWER SUPPLY: (230V ONLY)

To eliminate the possibility of an electric shock your machine has been fitted with a BS approved, non

rewireable moulded plug and cable which incorporates a fuse, the value of which is indicated on the pin

face of the plug. Should the fuse need to be replaced an

same rating, marked thus

able, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the

same colour as that visible on the pin face of the plug (i.e. red). Fuse covers are available from your

Draper Tools stockist.

If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be

suitably prepared and the correct type of plug fitted. See below.

*WARNING:

A plug with bare flexible wires exposed is hazardous if engaged in a live power socket outlet.

WARNING: THIS APPLIANCE MUST BE EARTHED. (230V ONLY)

The mains lead is coloured Green and Yellow - Earth, Blue - Neutral & Brown - Live.

As these colours may not correspond with the coloured markings identifying the terminals in your plug,

proceed as follows.:

The wire which is coloured green and yellow must be connected to the terminal in the plug which is

marked with the letter 'E' or by the earth symbol

The wire which is coloured blue must be connected to the terminal which is marked with the letter 'N' or

coloured black or blue.

The wire which is coloured brown must be connected to the terminal which is marked with the letter 'L' or

coloured red or brown.

WARNING:THIS APPLIANCE MUST BE EARTHED. (110V ONLY)

The mains lead is coloured Green and Yellow - Earth, Blue - Neutral & Brown - Live.

As these colours may not correspond with the coloured markings identifying the terminals in your plug,

proceed as follows.:

The wire which is coloured green and yellow must be connected to the terminal in the plug which is

marked with the letter 'E' or by the earth symbol

The wire which is coloured blue must be connected to the terminal which is marked with the letter 'N' or

coloured black or blue.

The wire which is coloured brown must be connected to the terminal which is marked with the letter 'L' or

coloured red or brown.

EXTENSION LEAD CHART:

Ampere rating

(on Name plate)

Extension cable length

7.5m

15m

22.5m

30m

40m

WIRING DIAGRAM

POWER CORD

. The fuse cover is detach-

0.75

SWITCH

BROWN

GREEN

BLUE

WIRING DIAGRAM

approved BS1362 fuse must be used of the

or coloured green or green and yellow.

Wire Size mm

0.75

BROWN

FILTER

BLUE

- 3 -

1.0

1.25

1.0

1.5

1.0

1.5

1.25

1.5

2.5

FIELD

YELLOW

ARMATURE

YELLOW