Draper FlexShade NEXD Istruzioni Installazione e funzionamento - Pagina 7

Sfoglia online o scarica il pdf Istruzioni Installazione e funzionamento per Arredamento per interni Draper FlexShade NEXD. Draper FlexShade NEXD 8. Clutch-operated small and large hardware
Anche per Draper FlexShade NEXD: Istruzioni per l'installazione e il funzionamento (6 pagine), Istruzioni Installazione e funzionamento (8 pagine), Manuale di istruzioni (8 pagine), Istruzioni Installazione e funzionamento (10 pagine), Manuale di istruzioni (12 pagine)

Stampa la pagina
Draper FlexShade NEXD Istruzioni Installazione e funzionamento
Clutch-Operated FlexShade
Small and Large Hardware

Section 7 - Attaching Fascia

STEP 1:
STEP 2:
Reverse Roll Fascia
1. Slide endcaps into fascia.
2. Using provided holes in endcaps, mark the fascia for drilling.
3. Attach endcaps to fascia.
4. Mount endcaps/reverse roll fascia.
5. Install roller/fabric/operator assembly according to relevant
instructions.
Click fascia
6. Attach endcap covers to endcaps. Use double-sided tape to
into place
help secure in place.
7. Once in place, check for secure fit. If not secure, secure with
appropriate fastener

Section 8 - Pocket Headbox

1. Slide endcaps into the pocket extrusion of
headbox. Using provided holes in endcaps,
mark headbox for drilling.
2. Drill holes in back
or top
(wall mount)
.
mount)
3. Attach Pocket Headbox extrusion using
mounting hardware appropriate for site
conditions.
4. Install shade
.
(See Sections 1 -5)
6. Attach pocket closure. Once in place, secure
with appropriate fastener
(not included)
necessary.
NEXD,
®
STEP 1:
Fascia seats
on projections
on endcaps.
.
(not included)
Small Pocket Headbox
STEP 2:
(ceiling
STEP 1
Large Pocket Headbox
if
STEP 1
STEP 2:
Click fascia
into place
STEP 2
STEP 2
page 7 of 8
!
Fascia is not fully
seated until it
clicks into place
on both ends.
Once in place,
check for
secure fit.
STEP 3
Secure to Endcap
with Screw
STEP 3