Draper FlexShade NEXD Talimatlar Kurulum ve Çalıştırma - Sayfa 7

İç Mekan Mobilyaları Draper FlexShade NEXD için çevrimiçi göz atın veya pdf Talimatlar Kurulum ve Çalıştırma indirin. Draper FlexShade NEXD 8 sayfaları. Clutch-operated small and large hardware
Ayrıca Draper FlexShade NEXD için: Kurulum ve Çalıştırma Talimatları (6 sayfalar), Talimatlar Kurulum ve Çalıştırma (8 sayfalar), Talimatlar Kılavuzu (8 sayfalar), Talimatlar Kurulum ve Çalıştırma (10 sayfalar), Talimatlar Kılavuzu (12 sayfalar)

Sayfayı Yazdır
Draper FlexShade NEXD Talimatlar Kurulum ve Çalıştırma
Clutch-Operated FlexShade
Small and Large Hardware

Section 7 - Attaching Fascia

STEP 1:
STEP 2:
Reverse Roll Fascia
1. Slide endcaps into fascia.
2. Using provided holes in endcaps, mark the fascia for drilling.
3. Attach endcaps to fascia.
4. Mount endcaps/reverse roll fascia.
5. Install roller/fabric/operator assembly according to relevant
instructions.
Click fascia
6. Attach endcap covers to endcaps. Use double-sided tape to
into place
help secure in place.
7. Once in place, check for secure fit. If not secure, secure with
appropriate fastener

Section 8 - Pocket Headbox

1. Slide endcaps into the pocket extrusion of
headbox. Using provided holes in endcaps,
mark headbox for drilling.
2. Drill holes in back
or top
(wall mount)
.
mount)
3. Attach Pocket Headbox extrusion using
mounting hardware appropriate for site
conditions.
4. Install shade
.
(See Sections 1 -5)
6. Attach pocket closure. Once in place, secure
with appropriate fastener
(not included)
necessary.
NEXD,
®
STEP 1:
Fascia seats
on projections
on endcaps.
.
(not included)
Small Pocket Headbox
STEP 2:
(ceiling
STEP 1
Large Pocket Headbox
if
STEP 1
STEP 2:
Click fascia
into place
STEP 2
STEP 2
page 7 of 8
!
Fascia is not fully
seated until it
clicks into place
on both ends.
Once in place,
check for
secure fit.
STEP 3
Secure to Endcap
with Screw
STEP 3