Draper Motorized FlexShade Manuale di istruzioni - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per Arredamento per interni Draper Motorized FlexShade. Draper Motorized FlexShade 12. Motor operated window shades with several control options
Anche per Draper Motorized FlexShade: Istruzioni per l'installazione e il funzionamento (8 pagine)
Motorized FlexShade
Section 4 - Pocket Headbox Installation
Please Note: If unit is to be installed
without Surface or Pocket Headbox,
please proceed to Section 5.
Caution: Before mounting shades,
verify measurements on the card
provided with the shade, and ensure
the endcaps are installed at the
correct width.
2.
Mark location
of optional pre-drilled
pocket mounting holes and
bracket mounting holes on top side
of headbox on mounting surface.
5.
Slide endcaps and coupler
cover piece of surface headbox.
A
. Begin with one end.
(Motor End shown)
6.
Mount
pocket closure.
Small Pocket Headbox
STEP 1
STEP 2
®
(Coupled)
(Optional)
Please Note: Installer must provide
adequate clearance for removal of
Roller Assembly during installation
and maintenance.
Please Note: Headbox MUST BE
mounted directly to ceiling or wall,
or to a continuous blocking that has
been secured to building structure.
1.
Lift headbox into
mounting position.
into top/back
(s)
B
. Slide coupler
into headbox.
STEP 3
3.
Drill small starter
hole
(if necessary)
in mounting
surface.
4.
Mount pocket
headbox using
appropriate
fasteners for
surface.
(s)
Large Pocket Headbox
STEP 1
page 5 of 12
C
. Slide opposite side
endcaps into headbox.
(Idler End shown.)
STEP 3
STEP 2