Draper Motorized FlexShade Instructions Manual - Page 5

Browse online or download pdf Instructions Manual for Indoor Furnishing Draper Motorized FlexShade. Draper Motorized FlexShade 12 pages. Motor operated window shades with several control options
Also for Draper Motorized FlexShade: Installation & Operation Instructions (8 pages)

Print Page
Motorized FlexShade

Section 4 - Pocket Headbox Installation

Please Note: If unit is to be installed
without Surface or Pocket Headbox,
please proceed to Section 5.
Caution: Before mounting shades,
verify measurements on the card
provided with the shade, and ensure
the endcaps are installed at the
correct width.
2.
Mark location
of optional pre-drilled
pocket mounting holes and
bracket mounting holes on top side
of headbox on mounting surface.
5.
Slide endcaps and coupler
cover piece of surface headbox.
A
. Begin with one end.
(Motor End shown)
6.
Mount
pocket closure.
Small Pocket Headbox
STEP 1
STEP 2
®
(Coupled)

(Optional)

Please Note: Installer must provide
adequate clearance for removal of
Roller Assembly during installation
and maintenance.
Please Note: Headbox MUST BE
mounted directly to ceiling or wall,
or to a continuous blocking that has
been secured to building structure.
1.
Lift headbox into
mounting position.
into top/back
(s)
B
. Slide coupler
into headbox.
STEP 3
3.
Drill small starter
hole
(if necessary)
in mounting
surface.
4.
Mount pocket
headbox using
appropriate
fasteners for
surface.
(s)
Large Pocket Headbox
STEP 1
page 5 of 12
C
. Slide opposite side
endcaps into headbox.
(Idler End shown.)
STEP 3
STEP 2