BDI EILEEN 5166 Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Arredamento per interni BDI EILEEN 5166. BDI EILEEN 5166 12.

ASSEMBLY

Insert 4 Barrels (H3) into the holes on the top of

the Top Panel (C3), and 4 Barrels (H3) into the

holes on the bottom of the Bottom Panel (C4).

Make sure that the hole in the side of the Barrels

is aligned with the holes in the end of the panels.

After the Barrels are installed, screw the 8 Set

Screws (H4) into the Barrels using the Flat Head

Screwdriver (T2). Do not turn more than 1–2

rotations.

NOTE: Look into the side of the Barrel Nuts (H3) and make sure the Set Screw (H4) is not blocking the hole.

If the hole is blocked, unscrew the set screw a few turns until the hole is clear, which will allow the cam

bolts to enter.

6 | BDIUSA.COM

STEP 2. PREPARE BARREL & SET SCREW

FLAT HEAD

SCREWDRIVER – T2

BARREL – H3

SET SCREW – H4

Hardware Combination

Hardware Orientation

(H3) Barrel

Slot Orientation

QTY

EILEEN 5166