BDI EILEEN 5166 사용 설명서 - 페이지 6

{카테고리_이름} BDI EILEEN 5166에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BDI EILEEN 5166 12 페이지.

ASSEMBLY

Insert 4 Barrels (H3) into the holes on the top of

the Top Panel (C3), and 4 Barrels (H3) into the

holes on the bottom of the Bottom Panel (C4).

Make sure that the hole in the side of the Barrels

is aligned with the holes in the end of the panels.

After the Barrels are installed, screw the 8 Set

Screws (H4) into the Barrels using the Flat Head

Screwdriver (T2). Do not turn more than 1–2

rotations.

NOTE: Look into the side of the Barrel Nuts (H3) and make sure the Set Screw (H4) is not blocking the hole.

If the hole is blocked, unscrew the set screw a few turns until the hole is clear, which will allow the cam

bolts to enter.

6 | BDIUSA.COM

STEP 2. PREPARE BARREL & SET SCREW

FLAT HEAD

SCREWDRIVER – T2

BARREL – H3

SET SCREW – H4

Hardware Combination

Hardware Orientation

(H3) Barrel

Slot Orientation

QTY

EILEEN 5166