Alemlube 51037M Manuale tecnico del proprietario - Pagina 5

Sfoglia online o scarica il pdf Manuale tecnico del proprietario per Sistemi di lubrificazione Alemlube 51037M. Alemlube 51037M 7. Auto shut off nozzle with digital meter

Stampa la pagina
3.3 PROCEDURE FOR ENTER THE CORRECTION FACTOR DIRECTLY
Carefully follow the procedure indicated below.
FORMULA
Proper correction factor = current correction factor×(actual value/ display value)
Example:
Actual value
Display value
Current correction factor
Proper correction factor
1
Wait for the meter to go to standby.
2
Reset the resettable total.
3
Press the MENU key. Keep it pressed until similar
�ith the image sho�ed �the digit flash in
means the meter is in correction factor modification
mode.
4
Press the RESET key to choose the right digit from 0
to 9. Press the MENU key to start the next digit. So
the digit of correction factor can be changed one by
one.
5
Make sure the correction factor is right, press the
MENU key. Keep it pressed until quit calibration
mode, the factor is saved. The meter goes to standby
again.
NSW
QLD/PNG
TEL: (02) 9939 0711
TEL: (07) 3204 9166
FAX: (02) 9939 0411
FAX: (07) 3204 1224
Visit our website at
Instructions for the 51037M
20.75
18.96
1.000
1.000×(20.75/18.96)=1.000×1.094=1.094
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
www.alemlube.com.au
�one�, it
WA
SA/NT
TEL: (08) 9302 4199
TEL: (08) 8241 7111
FAX: (08) 9303 2095
FAX: (08) 8241 7011
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
5