Anchor Navi-Trac Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Tenda Anchor Navi-Trac. Anchor Navi-Trac 16. Tent jack
Anche per Anchor Navi-Trac: Manuale d'uso (18 pagine), Istruzioni per il montaggio (3 pagine)

Stampa la pagina

INSTALLING MID PANEL

INSERT FINGERS OF WHEELED PANEL GUIDE

INTO THE OPEN END OF THE RAFTER AND

WELDMENT. TIGHTEN THE BUTTERFLY NUT.

REVERSE FOR OPPOSITE SIDE OF BAY.

INSTALLING 2-PC GABLED END

WHEELED PANEL

GUIDE AT EAVE

USE LONG LIFTING

POLE TO PUSH EACH

HALF TO PEAK.

FABRIC TENSIONING

CATENARY

TAILS

TENSIONING

WEB (LEFT)

W/ RING

TENSIONING METHOD:

1. PASS RING OF LEFT TENSIONING WEB THROUGH OPPOSITE

CATENARY RING.

2. PASS RING OF RIGHT TENSIONING WEB THROUGH ITS OWN

CATENARY RING (PASSING OVER THE LEFT WEB).

3. CONTINUE RING OF RIGHT TENSIONING WEB THROUGH

OPPOSITE CATENARY RING.

4. OVERLAP BOTH TENSION RINGS. ATTACH WEB/RATHCET

AND TENSION DOWNARD AGAINST TENSION HOLE IN

UPRIGHT. (CATENARY RINGS SHOULD MOVE CLOSER

TOGETHER AS RATHCET IS TIGHTENED.)

TOP

UPRIGHT

WEB/RATCHET

PULL MID PANEL UP AND OVER THROUGH

CHANNELS IN RAFTER EXTRUSIONS.

WHEELED PANEL

GUIDE

SECURE LACE LINE AT TOP &

BOTTOM WITH FASTEX BUCKLES

TENSIONING

WEB (RIGHT)

W/ RING

TENSIONING RINGS

OVERLAPPED

1. USE WEB/ RATCHETS TO SECURE CATENARY ARCHES TO

UPRIGHTS, STAKE BASEPLATES BEFORE TENSIONING WEBS.

RAFTER

STANDARD LOOP &

GROMMET LACING

TIE OFF BOTTOM

LOOP

ATTACH WEB/RATCHET

TO TRIANGLE RING AND

TENSION DOWNWARD.