Anchor Beacon Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Impianto stereo Anchor Beacon. Anchor Beacon 2. Anchor beacon line array battery-powered, portable line array sound system
Anche per Anchor Beacon: Manuale d'uso (4 pagine), Manuale d'uso (4 pagine), Manuale d'uso (10 pagine), Manuale d'uso (7 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (2 pagine)

Stampa la pagina

ANCHOR AUDIO WIRELESS

CHANNEL SELECTION - BUILT-IN RECEIVER

1. Choose any available wireless channel from 1 thru 16

2. Set the Wireless Channel Selection Knob to the channel you choose in step 1

WIRELESS 1 CHANNEL

WIRELESS 2 CHANNEL

SELECTION

WIRELESS 2 RX

WIRELESS 1 RX

INDICATOR LIGHTS

WIRELESS 1

WIRELESS 2

VOLUME CONTROL

OPERATING THE WIRELESS MICROPHONE/TRANSMITTER

CHANNEL SELECTION -

HANDHELD TRANSMITTER

1. Unscrew battery cover on bottom of microphone

2. Set the CHANNEL SELECTOR dial to match the

channel setting of your receiver

3. Replace battery cover and tighten firmly

The wireless RX indicators will light (only one indicator will light at a time) when the wireless signal is being

transmitted and received

AC OPERATION & BATTERY CHARGING/INDICATORS

Beacon Sound Systems includes an automatic charging system designed to properly charge and maintain the

systems built-in batteries. To charge batteries plug the system into an AC outlet and operate as normal while

built-in batteries are charging. The CHARGE STATUS LED will light when charging. Bright red indicates charge

process has begun. Amber indicates the charge process is almost complete, and green indicates full battery.

It takes approximately 7 hours to charge the completely drained Beacon batteries.

SYSTEM STORAGE & BATTERIES

Fully charge batteries before first use and storage. For extended periods of storage either leave systemplugged

into an AC outlet or charge the system at least once each month for a minimum of 24 hours.

BUILT-IN BATTERY MAINTENANCE

To preserve battery life the built-in batteries MUST be FULLY charged before the first use. Regardless of length

of operation, it is recommended that batteries be fully charged as soon as possible after each use.

If you have two wireless

receivers repeat above for the

second receiver. Remember,

each receiver/transmitter

pair must be set to different

channels to avoid interference.

CHANNEL SELECTION -

BODY-PACK TRANSMITTER

1. The channel selection dial is located on the side

of the transmitter

2. Set the CHANNEL selection dial to match the

channel setting of the receiver

OPERATING THE BLUETOOTH TRANSMITTER

POWERING UP THE BLUETOOTH

1. Turn on the Bluetooth with the volume knob (it will

make a boot up noise).

2. Before hooking up your device, take a moment to

go over what the different LED light signals mean:

No light: indicates either Blutooth is off, or it

is in sleep mode, and cannot connect

Blinking light: indicates pairing mode, this is

when you should connect

Solid light: indicates connection, your device

is connected

PAIRING A DEVICE

1. Press the pairing button (it will acknowledge pairing mode with a beep) this mode will last 90 seconds. If no device is

paired within the 90 seconds, the Bluetooth will enter sleep mode.

2. When the Bluetooth module is in pairing mode, it is discoverable and will show up on the selection list of your Bluetooth

enabled device.

3. Select the Bluetooth titled "Anchor Audio" to pair your device with the Anchor Audio Sound System.

4. If a previously paired device is in range and discoverable, the unit should automatically make a connection, however

this may depend on your individual device.

5. When the device has successfully connected to the Bluetooth, the Bluetooth module will beep to signify connection and

the Blue LED will become solid.

6. Now you can play audio from your Bluetooth device to the Anchor Audio Portable Sound System. You can adjust volume

by using the Bluetooth module's knob, as well as the volume control on your device.

Frequently Asked Questions:

What is the range of Anchor Audio Bluetooth?

The Anchor Audio Bluetooth range is 100 ft. line of sight.

My Sound System is auto-connecting to a device, but I don't know which one. Can I disconnect directly from the

Sound System?

Yes, if your unit is auto-connecting to a device that you cannot identify (because for example, you're in a room with other peo-

ple who have connected to the unit in the past), you may need to manually disconnect that pair from the Sound System itself.

Just hold the 'pairing' button for two seconds, and the Sound System will disconnect from the device it is currently connected

to, and immediately go into pairing mode.

What kind of modes can my phone be in that allow the Bluetooth connection to still work?

Bluetooth will work in modes such as Airplane mode and Do Not Disturb (or the equivalent). Just be sure to still have your

Bluetooth setting turned on. To simplify the process, put your phone in the desired mode first, and then secure the Bluetooth

connection, as moving into these modes may cause disconnection.

What happens if I get a phone call?

Incoming and outgoing calls should pause the audio stream. The audio from the call should not be transmitted via Bluetooth.

To avoid interrupting audio, set device in Airplane mode, then enable Bluetooth, ensure your connected, and you should not

encounter any interruptions in your audio stream.

*Bluetooth connection and behavior may depend on your individual device settings and capabilities, all testing was done using an Apple iPhone.

NOTE: All Anchor Audio Sound System Bluetooth connections will be named "Anchor Audio", so if your using multiple systems,

be sure to keep track of each connection.

VOLUME/POWER KNOB

PAIRING

VOLUME

INDICATOR LIGHT

PAIRING BUTTON