Anchor Beacon BEA-8000 Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di altoparlanti Anchor Beacon BEA-8000. Anchor Beacon BEA-8000 11.

Stampa la pagina

Beacon® Sound System Owners Manual

BASIC SYSTEM OPERATION

NOTE: Fully Charge Batteries Before First Use!

1. Open Line Array (below)

2. Set all Input Levels to minimum & Tone Controls to

flat (middle) setting

3. Plug wired microphone into the MIC 1 or MIC 2 jacks

and/or any audio source into the LINE-IN jacks

4. Switch POWER to ON, Power ON LED will light

5. Slowly increase Level Controls for active Input Jacks

to desired volume

6. Adjust Tone Controls for desired sound quality

IMPORTANT: Make all connections with shielded cables to avoid

hum, buzzing or interference.

OPENING BEACON LINE ARRAY

1. Open Array latches

2. Grasp handle and remove Array from base

3. Turn Array over and place on top of base

4. Close Array latches

5. Slowly flip Array Tower up until locked

securely into place

IMPORTANT: Latches MUST be locked and grill MUST

face forward for system to work!

CLOSING BEACON LINE ARRAY

1. Turn POWER to OFF

2. Fold Array in half (apply slight pressure)

3. Open latches and remove folded Array

4. Turn Array over grasp handle and slide into base

5. Close Array latches

WIRELESS RECEIVERS

TONE CONTROLS – BASS/TREBLE

LINE IN LEVEL CONTROL

MICROPHONE LEVEL CONTROLS

LINE OUT – OUTPUT JACK

Record your presentation or connnect to

another powered sound system.

LINE IN – INPUT JACKS

The 1/8 (3.5mm) jack is used to hook

up a portable CD player, iPod, laptop

or other external audio source.

Dual RCA unbalanced inputs can

be used for daisy-chaining together

multiple Beacon speakers.

UNIVERSAL MIC – INPUT JACKS

Balanced XLR – low impedance, for balanced mic,

powers condenser-type mics.

Unbalanced 1/4" – high impedance, for unbalanced

mics, no phantom power.

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

BACK PANEL OF BEA-8000CU2

(see page 5)

Balanced 1/4"

POWER SWITCH

MADE IN USA

SIX YEAR WARRANTY

BLUETOOTH RECEIVER

(see page 7)

CD/MP3 COMBO PLAYER

(see page 4)

CHARGE STATUS LEDS

Green - Charge complete

Amber - Charge nearly complete

Red - Charging has begun

Power On LED

Green - power on

Battery Empty LED

Red - charge battery immediately

USB DC OUT - 5V 500 mA

To charge/power external device

AC POWER CORD INLET