Formech DT-508 Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Macchine per la formatura sottovuoto Formech DT-508. Formech DT-508 5. Vacuum forming machine

Heating the Machine

 From this screen you should press on the Settings Icon to open the settings menu

 From the settings menu you can set the temperature of the machine by selecting the

active power percent setting (Red Square)

o This setting is the level of power the heater puts out when the top is pulled out

o Enter in the number you want the power to be set to then press the ENT button

 After you set the active temperature percentage you should set the passive power

setting (Orange Square)

o This setting is the level of power the heater puts out when the top is pushed

back

 After you have your heat power percentages set you need to activate the heating zones

by pressing each zone on the screen (Green Square)

o You can tell it is turned on when the heat power percentage shows up in the

zone

o When using the reducing windows only turn on the zones needed to head in

those windows

 Half reducer use only zones 1 and 2

 Quarter reducer use only zone 1

 No reducer use all zones

 Once you have turned on the zones you need press the back button (Purple Square) to

go back to the Main Screen