formlabs Form 2 Manuale - Pagina 16

Sfoglia online o scarica il pdf Manuale per Stampanti 3D formlabs Form 2. formlabs Form 2 18.
Anche per formlabs Form 2: Manuale di avvio rapido (7 pagine)

Stampa la pagina

1. Remove the Resin Cartridge
2. Set up
3. Insert the Tank Resin
4. Print
5. Cleaning
6. Cleaning the Tank Resin

Chapter 3

Cleaning

3.1

Cleaning the optical window

Inspect the optical surface.

If you can see some dust :

First, remove the dust with a rubber bulb air blower.

And then R-remove the dust with a dry wipe (moving from the top to the

bottom and then from the left to the right side of the optical window).

If you can see some resin, ﬁngerprints... :

Put a small amount of isopropyl alcohol to an optical paper.

Clean the glass surface with a wet wipe by moving from the top to the bottom

and then from the left to the right side of the optical window.

Clean the glass with a dry wipe to ﬁnish.