Andatech ASC-200 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Telecamera di sicurezza Andatech ASC-200. Andatech ASC-200 17. Smart wireless solar camera

4

Installation Instructions

The SolarCam can be mounted onto a post or on a wall. The wall must be
thick enough to hold three times the weight of the camera.
1) Prior to setup and selecting the location of installation:
a. Confirm that there will be stable WiFi signal (at least two grids of
signals). If the signal is not strong enough, you may need to install a
WiFi booster or repeater to extend the WiFi coverage.
b. Select an area with sufficient sunlight. Ideally, position the camera
under direct sunlight.
c. Avoid areas with moving objects that may interfere with the camera.
2) Wall Mount Setup
a. Remove the sticker and place it onto the wall where you wish to
set up the camera.
b. Drill holes in the 3 marked circles and insert the green expansion
screw into the hole. (See Fig. 2.2)
Repeater
Camera
c . Align the holes of the mounting bracket with the expansion screws
and secure the bracket into place. (See Fig. 2.3)
d. Install the camera onto the bracket and secure it in place using the
screw.
3) Post Mount Setup
a. Secure the mounting bracket onto the post or pole with the plastic
zip ties provided and tighten them as much as possible. (See Fig.2.4)
b. Install the camera onto the bracket and secure it in place using the
screw.
Router
Fig. 2.1
8
Fig. 2.2