ANDERSON-NEGELE MPI-300 Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Strumenti ANDERSON-NEGELE MPI-300. ANDERSON-NEGELE MPI-300 8. Ncs-m parameter tool

Operating Manual MPI-300

With the sof tware, it is possible to set the switching threshold, the hysteresis, and the time

delay of 0.1 ... 10 secs of the capacitive limit sensor.

The step-by-step operation of the tool f or setting the parameters is shown below.

6.2

Operation of the Parameter Tool

If the sensor is already connected bef ore starting the program using the programming

adapter, the virtual COM ports of the USB adapter are included in the selection. Then the sen-

sor can be connected with the " Connect with sensor " button

If the sensor is detected, the message "NCS-M detected" appears

and the current parameter settings of the sensor are read out and

displayed. The sensor then measures continuously and the current

measured value is displayed.

If the sensor is not recognized correctly, the message "No NCS-M

f ound" is displayed.

With the button " Connect with sensor " a new connection attempt

can be made.