Andesfit Health ADF-B27A Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Misuratore di glicemia Andesfit Health ADF-B27A. Andesfit Health ADF-B27A 18.

Stampa la pagina

Fingertip testing

Hold the lancing device firmly against the side

of your finger. Press the release button. You

will hear a click, indicating that the puncture

is complete.

Choose a different spot each time you test. Repeated

■

punctures at the same spot may cause soreness and calluses.

Please consult your health care professional before you

■

begin AST.

It is recommended to discard the first drop of blood as it

■

might contain tissue fluid, which may affect the test result.

Performing a Blood Glucose Test

Step 1.

Wash hands with soap and warm water.

Step 2.

Remove a test strip from its vial. With clean, dry hands, you may

touch the test strip anywhere on its surface. Do not bend, cut or

modify the test strips in any way. Remove the test strip from the

vial and use it instantly.

Step 3.

Insert the test strip into the meter's test port and the meter is

turned on. The time and date appears on the screen.

NOTE: Be sure to use "Andesfit" test strips, other test

strips may not produce accurate results.

Step 4

When the blood drop symbol flashes on the

screen, you may select the appropriate measure-

ment mode, for selecting the measurement mode

of Control(CTL) or General, please refer to the

"THE TWO MEASURING MODES" section.

Step 5

Apply your blood to the absorbent hole of the test strip.

Step 6

As soon as enough blood has filled the confir-

mation window of the test strip, you will hear a

beep letting you know the test has begun. A

countdown of 5 seconds starts.

Note: make sure the confirmation window of the Test Strip is

completely filled with your blood sample.

Step 7

Your blood glucose level, along date and time

appears on the display. Blood glucose results

are automatically stored in the memory.

When bluetooth connected, Bluetooth symbol flashing,

and waiting for other device with Bluetooth to scan and

connect, then upload the test results data.