Electrolux SL series Utilizzo - Pagina 35

Sfoglia online o scarica il pdf Utilizzo per Cappa di ventilazione Electrolux SL series. Electrolux SL series 45.

ELECTRICAL CONNECTION

WARNING

The electrical connection can only be carried out by qualified professional personnel, using

standard material and state of the art installation methods. The manufacturer declines any

responsibility for installations carried out by unskilled persons and for installations which are

not in conformity with the standard norms concerning electrical safety (both concerning

methods and materials).

ELECTRICAL TECHNICAL DATA

The electrical technical data are available in the metallic rating plate of the hood. This you can

find inside the hood after you have removed the grease filters.

CONNECTION TO THE POWER SUPPLY

The flexible feed cable supplied is already connected internally and emerges from the hood

near the air outlet duct.

It is possible to effect two types of electric installation:

•

fixed installation;

•

installation by means of plug on a socket.

BEFORE ELECTRICAL INSTALLATION

Before connection you must:

•

Check that the electrical data indicated are in conformity with the main voltage and

frequency values of the building where the hood is to be installed;

•

Check that the building is fitted with electric safety systems to protect against short circuits

and electric shock systems, according to the laws in force;

•

Install an electric socket (or connection point) with a bipolar switch, which has contacts

with an opening of at least 3 mms;

•

If it is intended to install the hood with a plug, it is necessary that you have access to the

plug.

•

always turn off the main voltage supply by means of the bipolar switch before connecting

and switch on again only when connections have been completed, tested and are safe.

WARNING! I When the hood is in stand by the intensity of the light is reduced. This is

no failure.

PRECAUTIONS TO BE TAKEN IF REPAIRS ARE TO BE CARRIED OUT

Repairs must be carried out only by our SERVICE CENTERS. It is necessary to use only

original spare parts.

Any repairs carried out by others could prove to be dangerous and could be a fire risk.