Electrolux SL series Użycie - Strona 35

Przeglądaj online lub pobierz pdf Użycie dla Okap wentylacyjny Electrolux SL series. Electrolux SL series 45 stron.

ELECTRICAL CONNECTION

WARNING
The electrical connection can only be carried out by qualified professional personnel, using
standard material and state of the art installation methods. The manufacturer declines any
responsibility for installations carried out by unskilled persons and for installations which are
not in conformity with the standard norms concerning electrical safety (both concerning
methods and materials).
ELECTRICAL TECHNICAL DATA
The electrical technical data are available in the metallic rating plate of the hood. This you can
find inside the hood after you have removed the grease filters.
CONNECTION TO THE POWER SUPPLY
The flexible feed cable supplied is already connected internally and emerges from the hood
near the air outlet duct.
It is possible to effect two types of electric installation:
fixed installation;
installation by means of plug on a socket.
BEFORE ELECTRICAL INSTALLATION
Before connection you must:
Check that the electrical data indicated are in conformity with the main voltage and
frequency values of the building where the hood is to be installed;
Check that the building is fitted with electric safety systems to protect against short circuits
and electric shock systems, according to the laws in force;
Install an electric socket (or connection point) with a bipolar switch, which has contacts
with an opening of at least 3 mms;
If it is intended to install the hood with a plug, it is necessary that you have access to the
plug.
always turn off the main voltage supply by means of the bipolar switch before connecting
and switch on again only when connections have been completed, tested and are safe.
WARNING! I When the hood is in stand by the intensity of the light is reduced. This is
no failure.
PRECAUTIONS TO BE TAKEN IF REPAIRS ARE TO BE CARRIED OUT
Repairs must be carried out only by our SERVICE CENTERS. It is necessary to use only
original spare parts.
Any repairs carried out by others could prove to be dangerous and could be a fire risk.
35