DRIFT HD Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Telecamere d'azione DRIFT HD. DRIFT HD 17.
Anche per DRIFT HD: Manuale d'uso (19 pagine)

Stampa la pagina

using the remote

a) basiC ReMoTe use

The Drift HD comes with a wireless RF (radio frequency) remote control to allow easy,

hands-free operation of the camera. It can be used both to record video and to take

photos.

Note: Always make sure you fasten the remote control tightly and securely so you do

not lose it.

using the Remote Control

1. Ensure that the remote control has been enabled. If in doubt, open the Main Menu,

highlight the Setup menu and press SELECT. There should be a tick by the Remote

Control setting on the first page of the Setup Menu.

2. Attach the remote control to your wrist, handlebar or jacket using the short velcro

strap.

3. With the camera in Live Preview, press the RECORD button on the remote to start

recording or to take a photo. If the camera speaker is switched on, there will be a

beep.

4. If the camera is in Video Mode, press the remote control's STOP button to stop

recording. If the speaker is switched on, the camera will beep again.

Note: The remote control will not operate the camera if the camera is switched off.

b) ReMoTe PaiRinG

The Remote Pairing function links your camera to a specific remote. If unpaired, the

camera will work with any Drift HD remote control in range. This can cause problems

if more than one person is using a remote at the same time. For example, if your

friend presses his remote's STOP button, your recording will also stop, whether you

want it to or not. Pairing your remote to your camera will prevent this from happening

– your camera will only respond to instructions from your remote.

Your Drift HD remote is paired with your camera out of the box, so you do not need to

pair it again. If you lose or damage your remote however, you will need to cancel the

old pairing and pair the replacement remote with your camera.

To Cancel a Remote Pairing

1. Open the Setup Menu, highlight the Remote Pairing option and press the SELECT

button.

2. Highlight the Reset icon (the red "X") and press the SELECT button.

3. The Remote Pairing is now deleted. The icon next to the Remote Pairing option will

change into a red cross to indicate the remote is no longer paired.

Pairing the Remote Control to your camera

1. Press the MENU button to open the Main Menu.

2. Highlight the Setup icon, and press the SELECT button.

3. Highlight the Remote Pairing option on the first page of the Setup Menu and press

the SELECT button.

4. Press the RECORD Button on the Remote. The camera will beep if the remote is

recognized.

5. The icon next to the Remote Pairing option will change to indicate the pairing (two

white arrows).

Pairing Multiple Cameras to a single Remote

It is possible to pair multiple cameras with a single remote. This allows them all

to be operated with one button press, but prevents other Drift HD remotes from

RECORD Button

STOP Button

interrupting your recording.

For every camera you wish to pair:

1. Press the MENU button to open the Main Menu.

2. Highlight the Setup icon, and press the SELECT button.

3. Highlight the Remote Pairing option on the first page of the Setup Menu and press

the SELECT button. Leave the camera this way.

Once every camera to be paired is displaying the screen above:

4. Press the RECORD Button on the Remote. Each camera will beep if the remote

is recognized. Any camera that does not beep and return to the Setup menu

automatically will not be paired – try pressing the RECORD Button again if this

happens.

5. The icon next to the Remote Pairing option will change to indicate the pairing (two

white arrows) for each camera.

! When pairing multiple cameras, always test the remote to see if it operates all the

cameras before mounting them. You don't want to find out later that one of your

cameras didn't start recording.