Atlas DPA-102PM Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Atlas DPA-102PM. Atlas DPA-102PM 20. Networkable 2-channel power amplifier with dsp

Owner's Manual

Rear Panel Description

IEC AC Receptacle

The included IEC cord is designed to work with 110-120VAC. A separate IEC cord will need to be purchased for 220-240VAC operation.

AC Mains Fuse

Replaceable 2A, 250V fuse.

RCA Input

Unbalanced signals are accepted via the Ch 1 & Ch 2 RCA connectors.

Balanced Input Connections

Ch 1 & Ch 2 balanced input signals are accepted via the removable Phoenix type connector per the labeling on the rear of the amp.

Note: For unbalanced signals connect the (–) and (GND) pins together.

Speaker Connection

A removable Phoenix type connector is supplied to connect your speakers to the DPA-102PM. It is recommended to use class 3 rated,

16-gauge wire or higher for speaker wiring.

Note: Do not overload the amp by connecting too many speakers to the amp. Four Ω per channel is the minimum average impedance.

6. Remote Level Control

Remote location of the level control can be

accomplished via the Remote Level control port on the

DPA-102PM The control port is 10KΩ based system. It

is recommended the optional Atlas Sound WPD-VC10K

wall control be used. Set the system's maximum levels

using the amplifier level controls and then use the

remote 10KΩ potentiometer as an attenuator. Wiring

the WPD-VC10K will require using three conductor

unshielded wire connecting the WPD terminals to the

amp. Maximum distance can be up to 500 feet.

Note: Each channel of the DPA-102PM can be

controlled separately or together.

7. Ethernet Port

Connect the amplifier to the network or local computer using CAT5 cable to access amplifier's DSP and control settings.

DPA-102PM - Networkable 2-Channel

Power Amplifier with DSP

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

– 7 –

Specifications are subject to change without notice.

per channel is the minimum average impedance.

AtlasSound.com