Atlas Copco SMC-100-1600 Istruzioni per il prodotto - Pagina 7

Sfoglia online o scarica il pdf Istruzioni per il prodotto per Strumenti Atlas Copco SMC-100-1600. Atlas Copco SMC-100-1600 16. Torque arm

SMC-100-1600

Attaching and balancing the tool when mounted on a bench

Do not use SMC 200 and SMC 300 with a bench stand.

1. Adjust the height of the arm relative to the work piece. It is recommended

to mount the arm attachment at the same height as where the torque is ap-

plied.

2. Attach the tool holder to the tool.

3. Attach the tool holder to the arm. Install the screw and tighten it:

• SMC 12/25 (M6) - 10 Nm

• SMC 50/100 (M8) - 24 Nm

4. Install the set screw on the tool holder and tighten it to 2.5 Nm.

5. Balance the tool with the balancer.

Installation