anko BL9706-CB Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Frullatore anko BL9706-CB. anko BL9706-CB 8.

anko BL9706-CB Manuale d'uso

CLEANING AND MAINTENANCE

WARNING: Always ensure the product is unplugged from the electrical power
outlet before relocating, assembling, disassembling, or when cleaning.
CAUTION: Before disassembling the product for cleaning, ensure the blades have
completely stopped and use caution when attaching or detaching them, as they are
extremely sharp.
Always clean the product immediately after each use. Wash all parts except the
Motor Housing in warm, soapy water and then rinse and dry thoroughly. Never
immerse the motor housing in water or other liquids. Never use abrasive cleaners
on any part of the product. DO NOT place any parts into a dishwasher or
extremely hot water.
To disassemble the glass jar for thorough cleaning, turn the blade base clockwise
and remove it. Take out the gasket from the blade assembly carefully. Use a small
brush (not included) to remove particles of food lodged underneath the blades. To
reassemble, replace the gasket in the blade assembly, put the blade assembly on the
glass jug, and then turn the blade base counterclockwise until it is tightened onto
the glass jug (refer to the Parts illustration on page 4).
STORAGE
1. Disconnect from mains power and clean the unit.
2. Ensure all parts are properly dried.
3. Store in original box or in a clean, dry place.
4. Never store the blender while it is hot or while connected to mains power.
5. Never wrap the cord tightly around the product. Never place any stress on the
cord, especially where the cord enters the unit, as this could cause the cord to fray
and break.

TECHNICAL SPECIFICATION

Voltage: 220-240Va.c. 50-60Hz
Power: 500W
Jar Max. Capacity: 1500ml
6