anko BL9706-CB User Manual - Page 7

Browse online or download pdf User Manual for Blender anko BL9706-CB. anko BL9706-CB 8 pages.

Print Page

CLEANING AND MAINTENANCE

WARNING: Always ensure the product is unplugged from the electrical power

outlet before relocating, assembling, disassembling, or when cleaning.

CAUTION: Before disassembling the product for cleaning, ensure the blades have

completely stopped and use caution when attaching or detaching them, as they are

extremely sharp.

Always clean the product immediately after each use. Wash all parts except the

Motor Housing in warm, soapy water and then rinse and dry thoroughly. Never

immerse the motor housing in water or other liquids. Never use abrasive cleaners

on any part of the product. DO NOT place any parts into a dishwasher or

extremely hot water.

To disassemble the glass jar for thorough cleaning, turn the blade base clockwise

and remove it. Take out the gasket from the blade assembly carefully. Use a small

brush (not included) to remove particles of food lodged underneath the blades. To

reassemble, replace the gasket in the blade assembly, put the blade assembly on the

glass jug, and then turn the blade base counterclockwise until it is tightened onto

the glass jug (refer to the Parts illustration on page 4).

STORAGE

1. Disconnect from mains power and clean the unit.

2. Ensure all parts are properly dried.

3. Store in original box or in a clean, dry place.

4. Never store the blender while it is hot or while connected to mains power.

5. Never wrap the cord tightly around the product. Never place any stress on the

cord, especially where the cord enters the unit, as this could cause the cord to fray

and break.

Voltage: 220-240Va.c. 50-60Hz

Power: 500W

Jar Max. Capacity: 1500ml