ANLIDAR Mytorq MYBT-IM100 Manuale di funzionamento e manutenzione - Pagina 7

Sfoglia online o scarica il pdf Manuale di funzionamento e manutenzione per Cacciavite elettrico ANLIDAR Mytorq MYBT-IM100. ANLIDAR Mytorq MYBT-IM100 11. Cordless screwdriver

Stampa la pagina

1. Impact cordless screwdriver

Screws are continually fastened up while come along with clutch PA-PA-PA sound until the

device reaches of Five control the stop time.

(1) Trigger switch

The LED lights on when the trigger switch has been pressed about one-third down, and then the

screwdriver starts functioning when the switch trigger has been pressed half way down; on the

contrary, it stops when the screw has been tightened up or the trigger has been released.

(2) Forward/Reverse Lever

When push the Forward/Backward switch to the right. According to the symbol

switch, the screwdriver rotates clockwise and tightens the screws. When push the switch to

the screwdriver will rotate anti clockwise and loosen the screw. When the screwdriver is

idle, set the Forward/Reverse switch in the middle.

(3) LED light

While press the trigger, the LED lights up automatically to assist the job to be done; on the

contrary, it will be off once the trigger has been released.

(4) Bit sleeve

Switch the screw bit and compatibility, pull the head of the type B screwdriver, and install the bit

according to the diagram below, after installing the bit please also install the Socket Extension Insert

the sleeve and push it in following the arrow indicated on the diagram below on Diagram 2.

Pull the bit holder

Insert the bit

Manual / Functions

Forward (screw)

Diagram 1

Reverse (unscrew)

Insert the Socket

Extension

Diagram 2

on the