Airthings View Series Manuale di avvio rapido - Pagina 13
Sfoglia online o scarica il pdf Manuale di avvio rapido per Strumenti di misura Airthings View Series. Airthings View Series 16. Indoor air quality and radon monitor
Anche per Airthings View Series: Manuale di avvio rapido (16 pagine), Manuale d'uso (11 pagine), Manuale d'uso (5 pagine)
Stampa la pagina
Using your View
I don't see my Wave device when linking it to the View.
as a hub for
Bluetooth must be enabled on your smartphone. For Android, GPS location must be enabled for Bluetooth low energy to
other Airthings
function properly.
devices
You are not close enough to the Wave device or there is wireless interference. Keep your phone less than 1m / 3ft away
from the Wave device and search for the device again.
Exit the "Link device" screen and re-enter to try again.
I don't see my other View device when linking it to the View.
A View device is only able to connect by WiFi, and cannot be linked to an Airthings Hub, or another View device acting as
a hub.
I don't see data coming from the Wave devices when linked to my View.
Make sure the linking process was completed successfully in the app.
The Wave device might be out of range. Move the device close to the View for an hour and check if the App device
overview indicates a Hub connection by showing a signal strength bar, then move the Wave back to its place and verify
signal strength in the app. If the connection stops again, you might need to move the Hub to a different place.
Make sure your View is connected by WiFi. You can tell by checking that data from the View is regularly updated in the
app.
Also, make sure it is powered by USB. Your View will stop its hub functionality whenever it is only powered by batteries.
I set my View to the wrong region. What should I do?
Please contact customer support to have it manually reset. After a region reset, any Wave devices must be unlinked and the
View unpaired from your account before starting the setup over again.
Display
My display is flickering at times
This is normal, and is an effect of the display technology used.
My View is without power and batteries, but the display is still showing.
This is normal, and is an effect of the display technology used.