DSC PC2550 Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Sistema di sicurezza DSC PC2550. DSC PC2550 3.
Anche per DSC PC2550: Manuale di istruzioni (8 pagine), Manuale di istruzioni (17 pagine)

Stampa la pagina
DSC PC2550 Manuale di istruzioni
User's Programming Commands
[*]+[5]+[MASTER CODE]
The [*][5] user's programming commands are used to program additional access codes. Up to 16 user arm-
disarm codes may be programmed. The 1st code is the Master Code (factory default [1234]). The 16th code
is optionally a "One Time Use" or maid code. The 16th code may be changed from a "One Time Use" code to
a regular code using an installer's programming command (section [15]...light 8). Remember if no keypad
entry is made for more than 2 minutes the keypad will return to the normal arm-disarm display and the
complete command will have to be re-entered to program a new access code.
Programming Additional Access Codes
1. Press the [*] and [5] keys then enter the Master Security Code (default [1234]) to enter the additional code
programming mode. The "Program" light and "Zone 1" light will be on to show that the first code (the Master
Code) is already programmed with the factory default code [1234]. The Master Code may be changed but do
not try to erase the Master Code. The installer can disable user changing of the Master Code by turning on
light 2 in section [16].
2. 15 additional codes may be programmed. The zone lights are used to indicate which of these codes are
already programmed (zone light on steady) and the one which is currently being programmed (zone light is
flashing).
3. To program the second code, press [2] and zone 2 light will flash. Then enter a 4 digit code and the buzzer
will beep three times and zone light 2 will come on steady indicating a programmed code.
4. To remove the second code, press [2] - the buzzer will beep three times and zone light 2 will flash. Enter