DSC PC5108L Manuale di installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione per Sistema di sicurezza DSC PC5108L. DSC PC5108L 17.

Consult the following wiring diagram for further information:

To DLM-4L

IN4

IN3

IN2

IN1

To Keybus

RED, BLK,

YEL and GRN

on next module/

control panel

NOTE: If a TV or VCR is used in combination with the DLM-4L, make

sure that the jumper J102 on the DLM-4L is removed and the TV/VCR

video input is set to 75 ohms.

2.4 Applying Power

After all wiring is completed, apply power to the control panel.

Connect the battery leads to the battery, then connect the AC trans-

former. For more information on control panel power specifications,

see the PC5015 Installation Manual.

Do not connect the power until all wiring is complete.

To video input (TV/VCR)

OUT

SYNC Input

(for external dwell control)

To DLM-4L:

DTA

CLK

GND

12+

IN5

IN6

IN7

IN8

Normally Closed

Tamper contact

(If no contact used,

connect a wire from

TAMP to any COM

terminal.)