DAITEM SH274AX Manuale di installazione - Pagina 3
Sfoglia online o scarica il pdf Manuale di installazione per Sensori di sicurezza DAITEM SH274AX. DAITEM SH274AX 13. Contact detector
Anche per DAITEM SH274AX: Manuale di installazione (4 pagine)
Stampa la paginaGB
2. Preparation
Recommendations
The user must not attempt to access the siren's internal parts, except areas
described in this manual. If the user does access these parts, the product
guarantee will be considered null and void and DAITEM shall not be held
responsible for any problems. Touching the siren's internal parts and/or electronic
components can damage the product. Furthermore, the siren is designed in such
a way that these parts and components do not need to be accessed for operation
or maintenance purposes.
2.1 Opening
1. Loosen the screws using
a cross-head screwdriver.
Guarantee sticker: remove the pre-cut part of the sticker and stick it to
the guarantee certificate in the user manual supplied with the control
panel. If you are adding the siren to an existing system, use the
guarantee sticker provided with this product.
2. Unclip the base plate cover.
58
2.2 Power supply
The lithium battery pack is clipped
into position (see diagram below).
An arrow indicates which way to
connect it.
Alignment
arrow
LED
When switched on the detector
performs a self-test: the indicator
lamp briefly lights up.
Lithium
battery