DAITEM SH274AX Installation Manual - Page 3

Browse online or download pdf Installation Manual for Security Sensors DAITEM SH274AX. DAITEM SH274AX 13 pages. Contact detector
Also for DAITEM SH274AX: Installation Manual (4 pages)

Print Page

2. Preparation

Recommendations

The user must not attempt to access the siren's internal parts, except areas

described in this manual. If the user does access these parts, the product

guarantee will be considered null and void and DAITEM shall not be held

responsible for any problems. Touching the siren's internal parts and/or electronic

components can damage the product. Furthermore, the siren is designed in such

a way that these parts and components do not need to be accessed for operation

or maintenance purposes.

2.1 Opening

1. Loosen the screws using

a cross-head screwdriver.

Guarantee sticker: remove the pre-cut part of the sticker and stick it to

the guarantee certiﬁcate in the user manual supplied with the control

panel. If you are adding the siren to an existing system, use the

guarantee sticker provided with this product.

2. Unclip the base plate cover.

2.2 Power supply

The lithium battery pack is clipped

into position (see diagram below).

An arrow indicates which way to

connect it.

Alignment

arrow

LED

When switched on the detector

performs a self-test: the indicator

lamp brieﬂy lights up.

Lithium

battery