DAITEM SH274AX Installation Manual - Page 6

Browse online or download pdf Installation Manual for Security Sensors DAITEM SH274AX. DAITEM SH274AX 13 pages. Contact detector
Also for DAITEM SH274AX: Installation Manual (4 pages)

Print Page

4.2 Fixing method and installing the magnet holder

Fix the back plate to the wall using 2 screws suitable for wall ﬁxing. When the entrance is closed the magnet

holder must be positioned opposite the built-in contact less than 5 mm away from it.

1. Align the vertical slot on the

magnet holder with the arrow

located on the base of the

detector.

35 mm

slot-arrow

alignment

IMPORTANT: the parts must

be laterally aligned and their

height adjusted for the

detector to operate

correctly.

2. Adjust the height of the

magnet holder according to

the diagrams below.

Max :

5 mm

Max :

5 mm

If necessary use the spacer supplied for the magnet holder

or position a spacer below the normally closed detector.

3. Fix the magnet holder base,

place the magnet inside the

cover and clip it to the base.

Magnet holder

Detector

Spacers

Spacer

Cover

Magnet

Base

Spacers