ansio Aeropura Midi Istruzioni e manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Istruzioni e manuale operativo per Deumidificatore ansio Aeropura Midi. ansio Aeropura Midi 13. 12l dehumidifier

Switch ON/OFF the Unit (Power Button)

•

Connect the unit to the power supply. Press the power button once to turn on the unit. The unit runs on manual continuous

dehumidifying mode by default with high fan speed. The ON/OFF indicator light will be on.

•

Press the power button to turn off the unit. The unit will stop working. However, the fan will work for a few seconds to blow

out the hot air from the unit.

Timer Function (Timer Button)

•

Press the timer button to switch the timer on. Keep pressing this button until the preferred time in hours (from 1 hour to

24 hours) is displayed. The unit will automatically turn off after this time.

NOTE: The timer indicator light will be on if the unit is in the timer mode.

•

Auto timer OFF setting will be cancelled if the timer button is pressed 2 times in 3 seconds. The timer indicator light will be

off.

NOTE: Auto timer OFF setting will be cancelled if the unit is switched off and switched on again using the power button.

Humidity Setting (Up & Down Buttons)

The humidity reading display at the centre of the control panel displays the room humidity level.

•

Press the up/down buttons to select your preferred humidity from CO-30%-35%-40%-45%-50%-55%-60%-65%-70%-

•

75%-80%-CO.

NOTE: If the set humidity is higher than the room's humidity, the unit will automatically shut down in a few minutes.

•

CO indicates the machine is running in continuous dehumidifying mode irrespective of the room's humidity level.

NOTE:

a. If you would like to know whether the unit runs in CO mode or if a humidity level has been set, press up or down arrow

button once. The display will either indicate CO or the set humidity level for 2 seconds, after which it will display the

room humidity level.

b. In the laundry mode, the humidity reading display will show the room humidity level and this cannot be changed as the

unit will be running in the continuous dehumidification mode.

c. In the Child Lock mode, LC will be indicated in the humidity reading display.

ANSIO 1539 (J21v01)

Customer Support - UK Toll Free 0800 080 6781; +44 207 157 9795