ansio 1523 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Inumidire ansio 1523. ansio 1523 8. Ultrasonic cool mist humidifier with night light

NOTE: Upon attaching, the water level in the tank will change

as the water settles into the base for the steam generation. This

is normal.

5. Make sure that there is no water anywhere near the unit before

turning the unit on.

• If the water in the tank is running low, then the refill indicator light will change

to red from blue and the unit will stop.

• To resume, add more water.

• The direction of the mist can be adjusted by turning the spout.

• To clean the unit, use the small brush provided with the humidifier.

The nightlight can be turned on by selecting the right mode (see table) using the

power button in the front of the humidifier.

The unit will automatically shut down when the water tank is removed from the base

of the unit.

CLEANING

• Unplug the unit before cleaning the humidifier.

• Inside the unit base: Pour excess water out, wash the unit using fresh water and

a cleaning brush. Do not allow water to enter the dry air exhaust port of the unit.

• Water tank: Lift the tank, pour out excess water, and clean the mist tube with

fresh water and brush

• Exterior: Wipe the unit surface with a soft cloth, if you see an accumulation of

water with usage and reduce humidity level.

ULTRASONIC DISK

1. Unplug, separate the base from the tank and empty all water

from the unit.

2. Locate the ultrasonic disk on the centre of the base unit.

3. Using only the provided cleaning brush, gently remove any

build-up from the disk and do not scrape the disk.

Customer Support - 0800 080 6781 (UK Toll Free) or +44 207 157 9795

Model: ANSIO 1523