ansio 1523 Manuale - Pagina 6
Sfoglia online o scarica il pdf Manuale per Inumidire ansio 1523. ansio 1523 8. Ultrasonic cool mist humidifier with night light
Stampa la paginaDESCALING
• Depending on the frequency of use, the unit will have to be descaled to optimise
performance of the humidifier.
• In areas with hard water, it is recommended to use distilled water for your
humidifier as it will stop build-up of scale
• If it becomes difficult to remove with just a brush:
1. Fill the base with a mixture of 1 tsp white vinegar and 1 tsp water, leaving it
for 5 minutes.
2. Clean the surface with the vinegar using a brush to remove any scale.
3. Rinse out the base to remove the scale/vinegar solution.
To store at the end of season:
• Clean the unit as per the instructions provided prior to storing at the end of the
season.
• Empty the unit of water entirely and make sure it is completely dry before storing.
• Pack into original packaging and store in cool and dry location.
TROUBLESHOOTING
• Water vapour / humidity is not being produced:
Turn off the unit, unplug, plug in and restart.
When the power returns, restart and try again.
Make sure the tank is correctly attached.
Clean ultrasonic disk.
• Air is flowing but not water vapour:
Remove a certain amount of water from the tank.
Empty all the water in the tank and refill it.
Clean the ultrasonic disk.
If you are in an area with hard water, try using soft water/distilled water.
• Humidity level low:
Clean ultrasonic disk.
Replace water with cool, but not cold water.
• The humidity is pungent/smells bad:
Clean the product entirely, and fill it with clean, cool water.
• White dust is forming on nearby furniture:
Use distilled water.
Clean the unit entirely and fill it with clean, cool water.
• Unit stopped working:
The tank is running low. Therefore, unplug the unit and refill the tank.
• Water is accumulating on the exterior and/or surrounding area:
Unplug and place on level surface (ensure that the unit is at least 2 feet off
the floor).
Lower mist control setting. Wipe down the unit using a dry cloth.
Customer Support - 0800 080 6781 (UK Toll Free) or +44 207 157 9795
Model: ANSIO 1523
6