DSC Classic PC1565 Manuale rapido - Pagina 6

Sfoglia online o scarica il pdf Manuale rapido per Pannello di controllo DSC Classic PC1565. DSC Classic PC1565 18. Security control panels

Stampa la pagina

Features

Wiring

Wiring Keybus

The Keybus wiring is the most impor-

tant part of the installation process of

the Classic PC1565 and its associated

modules. The Keybus is a simple 4-

wire connection between the main

control panel and all modules con-

nected to it. Do not use the Keybus

cable for connection to any other

devices: e.g., do not try to repower

detectors or devices using the extra

cores in a multi core cable. The

Keybus is coloured RED, BLACK,

YELLOW, GREEN. All units can be

connected to the Keybus in a star or

daisy chain formation. All modules

have clearly marked terminal blocks

that identify the Keybus connection.

The Keybus must be run in a mini-

mum of 22- gauge, non shielded wire

(use shielded wire for intercom

stations only). Any module can be

connected anywhere to the Keybus

provided it is not more than 305

meters from the control panel.

Features

Wiring Keybus

Translation

The Language Barrier

(01) Delay 1 = Final Exit 1

(02) Delay 2 = Final Exit 2

(03) Instant = Normal Zone

(05) Interior Stay/Away = (Part Set)

Zone will be omitted if no Final exit

zone is activated. Zone arms if final

exit activated.

(06) Delay Stay/Away zone = Always

gives entry delay.

(25) Interior Delay = Entry Route/

Walk Through for domestic installa-

tions. Use for Hall PIR. In the Stay

Armed mode, this zone will give entry

delay when activated.

(04) Interior = Entry Route/Walk

Through for commercial installations

only. This zone type will not give an

entry delay when activated in Stay

Armed mode.

(27) Push to Set = Push to Set must

be double end of line resistors. Can

be o/c device but set to Force Arm,

display will read secure system or

enter code to set.

Another term that you may not be fully

familiar with is "Swinger Shut Down".

This feature is a false alarm feature and

is used to control the number of times

a signal is transmitted to the central

station in a given set condition. This is

zone-linked and defaulted to three

transmissions per zone. What this

means is that if a zone goes faulty and

keeps triggering the communicator, the

transmission will only be sent a maxi-

mum of three times.

Translation

Features