ATSC AT2016 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore TV ATSC AT2016. ATSC AT2016 20.

Stampa la pagina

1.2 Front Panel and Rear Panel Illustration

1.2.1 Front Panel

ON
OFF
AT2016
1
POWER BUTTON: Used to turn on or off of the main power of the unit.
2
REMOTE CONTROL SENSOR: Used to receive the signal from the remote control.
3
STANDBY INDICATOR: Used to visually show power state of the
the red LED will be light if the
4. CHANNEL UP/DOWN: Used to change the channels in non-menu state.

1.2.2 Rear Panel

MODEL: AT2016
ATSC CONVERTER BOX
POWER SUPPLY: 100-240V~ 50/60Hz
MAX POWER CONSUMPTION: 8 WATTS
ATSC
NTSC
RF IN
RF OUT
CH 3
CH 4
1
2
3
1
RF IN :
Connect the AIR antenna or CATV cable here.(if the cable provider is passing
through 8VSB signal.)
2 RF OUT: This socket will transmit the NTSC CH3/4 RF signal to your TV ANT in socket.
3 CH3/4 SWITCH: Select NTSC channel (Channel3:61.25MHz, Channel4:67.25MHz).
4
SMART ANT I/F: Connect to an external smart antenna.
5
AUDIO L/R:
Connect these terminals to the analog audio inputs of a TV set (i.e., to a
TV that has jacks for L/R inputs). Or connect these terminals to the L/R inputs of a
separate audio component.
6
Video output: Connect this jack to the Video Input jack on your TV using an Audio/Video
cable.This output port supports the only SD output..
7 SERVIC
: This RS-232 PORT for software upgrade by manufacturer only and not for user.
8 MAIN POWER: Connect to main power supply using the power cord.
Atsc Converter Box
entered standby mode.
Serial No.:
CONFORMS TO UL
STD.60065
CERTIFIED TO CSA
STD.C22.2 No. 60065
L
VIDEO
Video Out
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
R
SERVICE
undesired operation.
SMART ANT. I /F
Audio Out
4
5
6
7
CHANNEL
Atsc Converter Box
,
100-240V~
50/60Hz
7
8