ATSC AT2016 Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Caixa de conversão de TV ATSC AT2016. ATSC AT2016 20 páginas.
Imprimir página1.2 Front Panel and Rear Panel Illustration
1.2.1 Front Panel
ON
OFF
AT2016
1
POWER BUTTON: Used to turn on or off of the main power of the unit.
2
REMOTE CONTROL SENSOR: Used to receive the signal from the remote control.
3
STANDBY INDICATOR: Used to visually show power state of the
the red LED will be light if the
4. CHANNEL UP/DOWN: Used to change the channels in non-menu state.
1.2.2 Rear Panel
MODEL: AT2016
ATSC CONVERTER BOX
POWER SUPPLY: 100-240V~ 50/60Hz
MAX POWER CONSUMPTION: 8 WATTS
ATSC
NTSC
RF IN
RF OUT
CH 3
CH 4
1
2
3
1
RF IN :
Connect the AIR antenna or CATV cable here.(if the cable provider is passing
through 8VSB signal.)
2 RF OUT: This socket will transmit the NTSC CH3/4 RF signal to your TV ANT in socket.
3 CH3/4 SWITCH: Select NTSC channel (Channel3:61.25MHz, Channel4:67.25MHz).
4
SMART ANT I/F: Connect to an external smart antenna.
5
AUDIO L/R:
Connect these terminals to the analog audio inputs of a TV set (i.e., to a
TV that has jacks for L/R inputs). Or connect these terminals to the L/R inputs of a
separate audio component.
6
Video output: Connect this jack to the Video Input jack on your TV using an Audio/Video
cable.This output port supports the only SD output..
7 SERVIC
: This RS-232 PORT for software upgrade by manufacturer only and not for user.
8 MAIN POWER: Connect to main power supply using the power cord.
Atsc Converter Box
entered standby mode.
Serial No.:
CONFORMS TO UL
STD.60065
CERTIFIED TO CSA
STD.C22.2 No. 60065
L
VIDEO
Video Out
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
R
SERVICE
undesired operation.
SMART ANT. I /F
Audio Out
4
5
6
7
CHANNEL
Atsc Converter Box
,
100-240V~
50/60Hz
7
8