ATT Holding Kade KZ-700-U/H Manuale di installazione - Pagina 8

Sfoglia online o scarica il pdf Manuale di installazione per Controllori di accesso IP ATT Holding Kade KZ-700-U/H. ATT Holding Kade KZ-700-U/H 12. Integrated access controller

Stampa la pagina

Integrated Access Controller – Installation manual

Detailed Programming Guide

User Settings

To enter the programming mode

To exit from the programming mode

Note that to undertake the following programming the master user must be logged in

To change the master code

Setting the working mode:

Set valid card or PIN users

Set valid card and PIN users

Set valid card ONLY

Note: When adding users, if the Card or PIN user has been enrolled already, you can not add it again to the

same zone, or the device will give a bleep as error. But it is ok to enroll the same card or PIN for the zone 1

and zone 2.

Card or PIN Mode - Factory default setting ( 3 1 2 # for Zone 1 or 3 2 2 # for Zone 2)

To add PIN users

To delete PIN users

To change the PIN of a PIN user

(This step must be done out of programming

mode)

To add a card user (Method 1)

This is the fastest way to enter cards using ID

number auto generation.

To add a card user (Method 2)

This is the alternative way to enter cards using

User ID Allocation. In this method a User ID is

allocated to a card. Only one user ID can be allo-

cated to a single card.

* Master code #

888888 is the default factory master code

0 New code # New code #

The master code is any 6 digits

3 1 2 # , Zone 1

3 2 2 # , Zone 2

Entry by card or PIN(Factory default setting)

3 1 1 # , Zone 1

3 2 1 # , Zone 2

Entry by Card and PIN together

3 1 0 # , Zone 1

3 2 0 # , Zone 2

Entry by Card only

1 1 User ID number # PIN #

Zone 1: User ID: 1-2000

1 2 User ID number # PIN #

Zone 2: User ID: 2001-2100

The PIN is any 4~8 digits between 0000~99999999 with

the exception of 1234 which is reserved. Users can be

added continuously without exiting programming mode

as follows:

1 1 User ID number 1 # PIN# User ID number 2 #

PIN # Zone 1

1 2 User ID number 1 # PIN# User ID number 2 #

PIN # Zone 2

2 0 User ID number #

Users can be deleted continuously without exiting pro-

gramming mode

* User ID number # Old PIN # New PIN #

New PIN #

1 1 Read card # Zone 1

1 2 Read card # Zone 2

Cards can be added continuously without exiting pro-

gramming mode

1 1 User ID number # Read Card # Zone 1 (User

ID: 1-2000)

1 2 User ID number # Read Card # Zone 2 (User

ID: 2001-2100)