DSPM Power Lynx 1 Specifiche tecniche - Pagina 2

Sfoglia online o scarica il pdf Specifiche tecniche per UPS DSPM Power Lynx 1. DSPM Power Lynx 1 10.

1.3 SUBMITALS

A. Submittals for engineering approval shall contain the following

1. Installation Drawings: Indicate electrical characteristics and connection require-

ments. Provide cabinet dimensions; battery type, size, dimensions, and weight and

location of conduit entry and exit; single-line diagram, control, and external wiring

requirements; heat rejection and air flow requirements.

2. Product Data: Provide catalog sheets and technical data sheets to indicate phys-

ical data and electrical performance, electrical characteristics, and connection re-

quirements.

B. Upon delivery of the UPS system the following submittals shall be included:

1. An operators and users manual showing safe and correct operation of all

UPS functions.

1.4 QUALIFICATIONS & QUALITY ASSURANCE

A. Manufacturers Certification: The manufacturer shall specialize in manufacturing

of on-line, double conversion, single phase UPS modules specified in this docu-

ment with a minimum of twenty years documented experience, and with a nation

wide service organization. The manufacturer will use only patented ECM technolo-

gy. The manufacturer shall comply with ISO 1001 and shall be designed to interna-

tionally accepted standards.

B. Factory Testing: Prior to shipment the manufacturer shall complete a document-

ed test procedure to test all functions of the UPS module and batteries (via a dis-

charge test) and guarantee compliance with the specification. The manufacturer

shall provide a copy of the test report upon request.

C. Materials and Assemblies: All materials and parts comprising the UPS shall be

new, of current manufacture, and shall not have been in prior service, except as

required during factory testing. All active electronic devices shall be solid state and

not exceed the manufacturers recommended tolerances for temperature or current

to ensure maximum reliability. All semiconductor devices shall be sealed. All relays

shall be provided with dust covers. The manufacturer shall conduct inspections on

incoming parts, modular assemblies and final products.

Title: Micro

Doc No.: 018-1000-02

Description: Emergency Lighting Inverter User's Manual

Phone :

Fax:

Rev: NR

Website:

Date: 07/26/2016

E-Mail:

1.877.DSPM.POWER

1.877.377.6769

909.930.3335

www.dspmanufacturing.com