DT Research DT311T Manuale operativo di base - Pagina 5
Sfoglia online o scarica il pdf Manuale operativo di base per Tavoletta DT Research DT311T. DT Research DT311T 9. Mobile tablet
Anche per DT Research DT311T: Manuale operativo di base (4 pagine)
Stampa la pagina
Wireless Networking
Wireless LAN
The DT311T is often delivered with an embedded (user‐inaccessible) 802.11ac WLAN adapter equipped with
a hidden custom antenna.
• Through the support of typical WLAN adapters, the DT311T should be able to detect all 802.11 access
points in the vicinity for you to select the access point of your choice for connection.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT311T and the access points have to
match. The SSID is case‐sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or
advanced alternatives) for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your
networking equipment literature to properly configure associated settings such as Authentication mode,
etc.
• Refer to the access point operating manuals for setting up the 802.11 access points.
Bluetooth
The Bluetooth configuration application is enabled from the System Tray or from the Windows Mobility
Center. Follow the instructions and options provided within the application to configure and invoke
Bluetooth connectivity with the corresponding peripherals.
USING THE MOBILE TABLET
Peripherals Support
Through its USB port, the DT311T supports a wide range of USB‐based peripherals. These peripherals are
applicable for software installation, applications storage, data storage, and system software recovery and
updates.
Remote Management
Depending on software configuration, the DT311T can be centrally managed for asset monitoring and for
software control. Please consult your device provider.
DT311
5
ENGLISH