- ページ 5

タブレット DT Research DT311TのPDF 基本操作マニュアルをオンラインで閲覧またはダウンロードできます。DT Research DT311T 9 ページ。 Mobile tablet
DT Research DT311T にも：基本操作マニュアル (4 ページ)

Wireless Networking

Wireless LAN

The DT311T is often delivered with an embedded (user‐inaccessible) 802.11ac WLAN adapter equipped with

a hidden custom antenna.

• Through the support of typical WLAN adapters, the DT311T should be able to detect all 802.11 access

points in the vicinity for you to select the access point of your choice for connection.

• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT311T and the access points have to

match. The SSID is case‐sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or

advanced alternatives) for secure access.

• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your

networking equipment literature to properly configure associated settings such as Authentication mode,

etc.

• Refer to the access point operating manuals for setting up the 802.11 access points.

Bluetooth

The Bluetooth configuration application is enabled from the System Tray or from the Windows Mobility

Center. Follow the instructions and options provided within the application to configure and invoke

Bluetooth connectivity with the corresponding peripherals.

USING THE MOBILE TABLET

Peripherals Support

Through its USB port, the DT311T supports a wide range of USB‐based peripherals. These peripherals are

applicable for software installation, applications storage, data storage, and system software recovery and

updates.

Remote Management

Depending on software configuration, the DT311T can be centrally managed for asset monitoring and for

software control. Please consult your device provider.

DT311

ENGLISH