Bounce LED RGB Series Manuale di avvio rapido - Pagina 5
Sfoglia online o scarica il pdf Manuale di avvio rapido per Apparecchiature di illuminazione Bounce LED RGB Series. Bounce LED RGB Series 5.
Stampa la paginaInstallation Guide
WARNING Please read these instructions completely and carefully.
Risk of electrical shock. Disconnect power before servicing or installing product
1
Ensure the inside of your channel letter or sign box is clean and
free of debris.
3
Wire up your modules using WAGO Splicing Connectors. Always
ensure positive-positive, R-R, B-B and G-G connection. Do not
exceed the maximum modules per series as this will result in
voltage drop.
5
Drill holes out the back of the letters or sign box for connection
to DC power supply
SALES & SUPPORT
02 9517 3222 |
PH
E
www.bounceled.com
2
Remove tape from the rear side and stick LED modules in place
using supplied LED layout.
4
Secure LEDs by gluing modules in place
6
Connect the LED modules from the sign to the receiver and
power supply. If there are multiple letters/signs, they should
connected in parallel to avoid voltage drop.