Bounce LED RGB Series 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Bounce LED RGB Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bounce LED RGB Series 5 페이지.
페이지 인쇄Installation Guide
WARNING Please read these instructions completely and carefully.
Risk of electrical shock. Disconnect power before servicing or installing product
1
Ensure the inside of your channel letter or sign box is clean and
free of debris.
3
Wire up your modules using WAGO Splicing Connectors. Always
ensure positive-positive, R-R, B-B and G-G connection. Do not
exceed the maximum modules per series as this will result in
voltage drop.
5
Drill holes out the back of the letters or sign box for connection
to DC power supply
SALES & SUPPORT
02 9517 3222 |
PH
E
www.bounceled.com
2
Remove tape from the rear side and stick LED modules in place
using supplied LED layout.
4
Secure LEDs by gluing modules in place
6
Connect the LED modules from the sign to the receiver and
power supply. If there are multiple letters/signs, they should
connected in parallel to avoid voltage drop.