AU Xperia Z3 SOL26 Manuale di base
Sfoglia online o scarica il pdf Manuale di base per Telefono cellulare AU Xperia Z3 SOL26. AU Xperia Z3 SOL26 3.
Stampa la paginaWhen using the product
・Communication is not possible even inside the service area in places where
the signal does not reach (e.g. tunnels and basements). Also,
communication is sometimes not possible in poor reception areas.
Communication is sometimes interrupted if you move into a poor reception
Be sure to read this manual before use
areas during communications.
・Since this product uses radio waves, the possibility of communication intercepts
by third parties cannot be eliminated (Though LTE/WiMAX 2+/CDMA/GSM/UMTS
system has highly secure confidential communication features).
・This product is compatible with the international roaming service. Each
SOL26
network service described in the manual varies depending on the area and
service content. For details, refer to the "Instruction Manual" (Japanese) app
installed on the product or " 取扱説明書（詳細版） (Full Instruction Manual)"
™
(Japanese) available on the au homepage.
Cautions on using Xperia
Z3
・Since this product is a radio station under the Radio Law, you may be asked
to temporarily submit the product for inspection in accordance with the Radio
Law.
・The IMEI information of your cell phone is automatically sent to KDDI COR-
PORATION for maintenance and monitoring operational status of your cell
phone.
・Since the battery is built into the product, you cannot replace it yourself. For
replacing the battery, contact an au shop or Customer Service Center.
・Take care not to inconvenience people around you when you use the product
in a public place.
・Company names and product names referred to in this manual are generally
・Before you start using the product overseas, check the relevant laws and
regulations of the country/region you visit.
trademarks or registered trademarks of respective companies. The TM, ®
marks may be omitted in this manual.
・When the product is used by a child, parents or guardians should thoroughly
read the "Basic Manual" and "Cautions on using Xperia
・In this manual, "Setting Guide", "Basic Manual", "取扱説明書（詳細版）(Full
Instruction Manual)" (Japanese), "Cautions on using Xperia
™
Z3", " 携帯電話
child how to use it.
機の比吸収率などについて(Radio Frequency (RF) exposure and Specific
■ Use of the product is not allowed in the following places!
Absorption Rate (SAR))" are collectively referred to as "Instruction Manual".
・Do not use a cell phone while driving a car or riding a motorbike or bicycle.
・In this manual, "microSD
™
memory card", "microSDHC
™
memory card" and
Failure to do so might cause a traffic accident. Use of a cell phone while
"microSDXC™ memory card" are abbreviated as "microSD memory card" or
driving a car or motorbike is prohibited by law. Use of a cell phone while
"microSD".
riding a bicycle may be punishable by some regulations.
™
・In this manual, "Xperia
Z3" is usually referred to as "the product".
・Use of cell phones on board is restricted. Follow the instructions of each air-
line.
September 2014, 1st Edition 1289-9032.1
When inserting an earphone, etc. into the product, adjust the volume
Be sure to read the following cautions before
Caution
to the proper level. Setting too loud a volume or using the earphone
use.
continuously for a long period of time might adversely affect your
ears. Also, raising the volume too high might prevent you from hearing
Do not store the product in places subject to direct sunlight (e.g. in
sounds around you, which might in turn lead to a traffic accident at a
automobiles), places that get hot, places that get extremely cold, and
railroad crossing or pedestrian crossing.
in humid or dusty places. Doing so might cause overheating, ignition,
When adjusting the volume with an earphone, etc. inserted into the
deformation or a fault.
product, raise the volume a little at a time. If you raise the volume too
Do not leave on unstable places such as rocky stands or tilting surfaces
much from the outset, sudden loud noise from the earphone, etc.
especially while the vibration mode set. Dropping the product may
might adversely affect your ears.
cause injury or damage. Also, pay sufficient attention to impact, etc.
When using an AC adapter or external device, insert/remove the
Do not cover or wrap the product with bedding, etc. while using or
connector straight to/from the terminal. Make sure the orientation of the
charging the product. Doing so might cause fire, fault or injury.
connector is correct. Failure to do so might cause damage or a fault.
■ Main unit
Do not touch the main unit or the specified AC adapter (sold
separately) for a long time while power is being supplied from an
external source. Doing so might cause low-temperature burns.
Danger
Be sure to read the following hazards before use.
The product may become hot by prolonged use especially in high-
temperature environment. Be careful when using the product touching
Do not puncture the product with a nail, hit with a hammer or step on
your skin for a long time, as it might cause low-temperature burns.
the product. Doing so might cause fire or damage.
Do not use power outlets or wiring apparatus beyond its rating. Also,
exceeding rating, for example, by connecting multiple devices to a
Do not disassemble, modify or directly solder the product. Doing so
single power strip might cause overheating and fire.
might cause spilling of the battery liquid resulting in an accident such
as loss of eyesight if it gets into eyes, or cause overheating, fire,
Do not place near corrosive chemicals or in places where corrosive
rupture or injury.
gas is generated. Doing so might cause a fault or loss of internal data.
Be careful not to have the product bitten by your pet. It might cause
Do not use if there is smoke, abnormal odor or noise, excessive
leakage of the internal battery, overheating, rupture, ignition, fire or
overheating, or other abnormalities. If an abnormality occurs,
injury.
disconnect the specified charging equipment (sold separately) from
the power outlet, make sure that the product is not overheating before
Be sure to read the following warnings before
turning the power off, and contact an au shop or Keitai Guarantee
Warning
use.
Service Center. Also, if you have dropped or damaged the product,
do not continue to use it in that state, and contact an au shop or Keitai
Do not use a cell phone while driving a car or riding a motorbike or
Guarantee Service Center.
bicycle. It might cause a traffic accident. Use of a cell phone while
driving a car or motorbike is prohibited by law. Use of a cell phone
while riding a bicycle may be punishable by some regulations.
g
Before cleaning the specified charging equipment (sold separately),
When unplugging the plug of the specified charging equipment (sold
unplug its power plug from the outlet or cigarette lighter socket. If the
separately) from the outlet or cigarette lighter socket, hold and pull the
plug remains plugged in when you clean the equipment, it might
power plug. If you pull the cable, the cable might be damaged.
cause an electric shock or short circuit.
Do not use Common DC Adapter 03 (sold separately) when the vehicle
Wipe off dust on the power plug. Failure to do so might cause fire,
engine is turned off. Doing so might cause drain the vehicle's battery.
burns or electric shock.
Do not use the desktop holder in a car. Doing so might disturb driving
Install and position in-car devices where they do not hinder driving or
and cause an accident. It is presumed that the desktop holder will be
safety equipment such as airbags. Failure to do so might cause a
used in the room and stable place.
traffic accident. Install in-car devices following the instructions of their
Pay attention to items becoming stuck to the Desktop Holder. The
manuals.
magnetic connector uses magnets, and so thumbtacks and pins, craft
Remove the power plug of the specified AC adapter (sold separately)
knife blades, staples, and other metal objects sometimes become
from the outlet or cigarette lighter socket when not using the adapter
stuck to the main unit, and cause unexpected injury. Before using the
for an extended period. Failure to do so might cause fire or a fault.
product, be sure to check that there are no foreign objects on the
magnetic connector or other parts.
Charging equipment is not waterproof. Do not use in places subject to
direct splashing with water, pet urine or other liquids. Doing so might
Do not bring magnetized objects such as cash cards, floppy disks,
result in faults or injury resulting from overheating, fire, electric shock,
credit cards, and prepaid cards close to the magnet connector of the
or short-circuiting of electronic circuits. In the event that the product is
desktop holder because magnets are used. Doing so might result in
splashed with liquid, immediately disconnect the power plug of the
loss of recorded information.
specified AC adapter (sold separately).
If you feel any abnormality with your skin, immediately consult a
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
depending on your physical constitution and condition.
Be sure to read the following cautions before
Caution
The materials of parts used on the Desktop Holder are as follows.
use.
Part
Do not leave the desktop holder on the floor. Doing so might cause
Upper case, Lower case
injury or accident if they accidentally step on the holder or fall.
Attachment
Magnet connector
Do not use in humid places such as bath areas, or connect/
Contact terminal, microUSB
disconnect the specified charging equipment (sold separately) with
connection terminal
wet hands. Doing so might cause electric shock, a fault or injury.
Housing (contact terminal)
Housing (microUSB connection
Charge the battery in a stable place especially while the vibration
terminal)
mode set. If placed on an inclined surface or wobbly stand, the
Sheild (microUSB connection
product might fall causing injury or damage. Be careful especially
terminal)
when vibration is set. In addition, do not cover or wrap the product
Name plate
with a cloth or bedding. Doing so might cause fire, a fault or injury.
n
■ Pay attention to the place of use and volume of your voice!
・To prevent ringtone from bothering other people, not only refrain from making
a call but also power off or use Silent mode at a movie theater, theater,
museum, library, etc.
・In a city area, use in a place where you do not bother people walking.
・It is extremely dangerous to walk while looking at the screen of the cell
phone. Do not make calls or operate a cell phone while walking or by
stopping suddenly.
・Move to a place where you do not disturb others while you are in shinkansen,
a hotel lobby, etc.
・Be careful not to be loud while talking.
・Ask permission if you take photos with your cell phone camera.
■ Consider people around you!
・There may be a person with a cardiac pacemaker nearby at a place filled
with people such as in a crowded train. Set "Airplane mode" or turn off
beforehand.
・When a medical institution has laid down designated areas where use of the
product is prohibited or is not allowed to be brought in, abide by the
instructions of that medical institution.
Exemptions
◎ The Company is not liable for any damages arising from earthquakes,
lightning, storms, floods or other natural disasters, as well as fires, actions by
third parties, other accidents, intentional or mistaken misoperation by the
customer, or use under other unusual conditions outside the responsibility of
the Company.
™
Z3" and teach the
◎ The Company is not liable for any incidental damages (change/
disappearance of described content, loss of business income, disruption of
business, etc.) arising from use of or inability to use the product.
◎ The Company is not liable for any damages arising from failure to observe
the described content of the "Instruction Manual".
◎ The Company is not liable for any damages arising, for example, from
malfunction caused by combination with connected devices or software not
related to the Company.
a
Follow the instructions of each medical facility for the use of cell phones
on their premises. Power off the product in a place where the use is
prohibited. Failure to do so may affect electronic equipment and
electronic medical equipment. If the function that turns on automatically is
set, deactivate the setting.
Turn off the product or put it in Airplane mode before boarding an
airplane. Use of cell phones on board is restricted. Follow the
instructions of each airline. If the function that turns on automatically is
set, deactivate the setting. Failure to do so may adversely affect on-
board electronic equipment. Prohibited acts related to cell phone
usage on an airplane may be punished by law.
When using the product near an implanted pacemaker, implanted
cardioverter-defibrillator or other electronic medical device, radio
waves might affect these units and devices. So, please observe the
following.
1. Those with an implanted pacemaker or implanted cardioverter-
defibrillator should carry or use the product at least 15 cm away
from the implanted pacemaker or implanted cardioverter-
defibrillator.
2. Set the product to "Airplane Mode" or turn it off beforehand, if you
may not keep distance 15 cm or more such as when you cannot
move easily etc., since there may be people with an implanted
cardiac pacemaker or implanted cardioverter-defibrillator nearby.
3. Pay attention to the following points when using the product inside
medical institutions.
・ Do not bring the product into operating theaters, intensive-care
units (ICU) and coronary care units (CCU).
・ Turn the product off in hospital wards.
・ Even if you are in a lobby, etc., be sure to turn the product off
when there are electronic medical devices nearby.
・ When a medical institution has laid down designated areas where
use of the product is prohibited or is not allowed to be brought in,
abide by the instructions of that medical institution.
4. When using electronic medical devices other than an implanted
pacemaker and implanted cardioverter-defibrillator outside a
medical institution (e.g. home medical treatment), check
individually with the manufacturer of the electronic medical device
regarding the influence of radio waves.
h
Part
Material
Surface treatment
Serial number label
PET resin
2D barcode label
PS resin
Submergence label
Fine paper
Rubber foot
Polyurethane resin
■ au Nano IC Card (LTE)
Be sure to read the following warnings before
Warning
use.
Do not put the au Nano IC Card (LTE) in a cooking apparatus such as
a microwave oven or a pressure vessel. Doing so might cause
melting, overheating, fuming, loss of data or a fault.
Be sure to read the following cautions before
Caution
use.
Be careful not to injure your hand or finger when attaching/removing
the au Nano IC Card (LTE).
Use only the devices specified by the Company to insert the au Nano
IC Card (LTE) in. Using a device not specified by the Company might
cause loss of data or a fault. For the specified devices, contact an au
Material
Surface treatment
shop or Customer Service Center.
ABS resin
−
Do not disassemble or modify the au Nano IC Card (LTE). Doing so
PC resin
−
might cause loss of data or a fault.
Neodymium
Nickel plating
Do not use or leave the au Nano IC Card (LTE) in hot places such as
Brass
Gold plating
by the fire or a heater. Doing so might cause melting, overheating,
fuming, loss of data or a fault.
PA resin
−
Polyester resin
−
Do not throw the au Nano IC Card (LTE) into a fire or heat it. Doing so
might cause melting, overheating, fuming, loss of data or a fault.
Stainless
−
Do not touch the IC (metal) part of the au Nano IC Card (LTE) or short-
circuit it. Doing so might cause loss of data or a fault.
PET (aluminum
−
evaporation) resin
o
◎ Captured image data or downloaded data may sometimes be altered or lost
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-
due to faults, repair or other handling of the product. The Company is not
liable for any damage or lost income resulting from recovery of these data.
◎ It is recommended you keep a copy of important data on your PC's hard disk,
etc. Whatever the cause of the defect or malfunction may be, the Company
*2 Minor injury:
assumes no responsibility for alteration or loss of saved data.
* "The Company" as appears in this manual refers to the following companies:
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
*3 Physical damage: This refers to extended damage to buildings, furniture,
Manufactured by: Sony Mobile Communications Inc.
■ Notice
■ Explanation of graphic symbols used in this manual
・Reproduction of the content of "Instruction Manual" in part or in whole is
prohibited.
・The content of "Instruction Manual" is subject to change without notice.
・Every effort has been made in the preparation of "Instruction Manual".
Should you notice any unclear points, omissions, etc., feel free to
Don't
contact us.
Safety Precautions (Observe Strictly)
No wet
hands
■ Before using this product, thoroughly read these safety precautions
for proper use. After reading, store the precautions in a safe place.
No disassembly
● These "Safety Precautions" describe instructions that should be observed to
prevent damage to property or injury to the customer or others using the
■ Precautions common to the main unit, internal battery, charging
product.
equipment, au Nano IC Card (LTE), peripheral devices
● These instructions are divided into the following categories.
■ Explanation of indications used in this manual
Danger
This symbol indicates the potential and imminent
*1
danger of death or serious injury
to a person.
This symbol indicates the possibility of death or serious
Warning
injury
*1
to a person.
*2
This symbol indicates the possibility of minor injury
to
Caution
*3
a person or physical damage
.
b
c
Stay alert to your surroundings when calling, messaging, browsing
the Internet, shooting photos, playing games, watching TV or listening
Transparent plate (display, rear
to music. Failure to do so might cause a fall or traffic accident.
panel)
Decorative ring (camera)
When using a flash/photo light, do not lighten in front of person's eye.
Also, while a flash/photo light is turning on, do not look at lighting part
Power key, Volume key, Camera
directly. Doing so might cause disabilities such as decreased vision,
key
etc. Especially, do not shoot small children at close range.
Magnet connector (resin parts)
Do not lighten a flash/photo light toward a person who drives an
automobile, motorized bicycle or a bicycle. Doing so might cause
accidents by dazzling and disable to drive.
Sometimes, very rarely some people demonstrate symptoms such as
Magnet connector (sheet metal) SUS
temporary muscle spasms, loss of consciousness, etc. by watching
Magnet connector (electrode
repeatedly flickering screens. Those with a past history of this should
parts)
consult with a physician beforehand.
Be sure to read the following cautions before
Caution
use.
Use of the main unit in an automobile might sometimes affect on-
vehicle electronic devices, though this rarely happens. If this
happens, stop use since this may impair safe travel.
If you feel any abnormality with your skin, immediately consult a
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
depending on your physical constitution and condition.
The materials of parts used on the product are as follows.
Part
Material
Surface treatment
Exterior case (top, bottom and
Aluminum alloy
Anodic oxide coating
side panels, microUSB
connection terminal cover,
microSD memory card/au Nano
IC Card (LTE) slot cover)
Exterior case (4 corners)
PA resin
ー
Exterior case (strap hole)
PA resin (with glass)
ー
Exterior case (headset
Nylon resin
ー
connection terminal)
Transparent plate (camera)
PMMA + PC resin
AR coating
i
j
■ Sony Mobile TV antenna cable 02
Do not drop the au Nano IC Card (LTE) or subject it to strong impact.
−
Doing so may cause a fault.
−
Do not fold, bend or place a heavy object on the au Nano IC Card
−
(LTE). Doing so may cause a fault.
−
Do not wet the au Nano IC Card (LTE). Doing so may cause a fault.
Do not scratch the IC (metal) part of the au Nano IC Card (LTE). Doing
so might cause a fault.
Do not store the au Nano IC Card (LTE) in dusty places. Doing so
might cause a fault.
Do not store the au Nano IC Card (LTE) in places exposed to direct
sunlight or hot and humid places. Doing so may cause a fault.
Store the au Nano IC Card (LTE) out of reach of small children. Failure
to do so might cause injury or asphyxiation, etc. if they accidentally
swallow and choke on it.
Connecting plug (body), cable,
headset connection terminal
(body)
Connecting plug (metal parts)
p
q
Before entering an area where flammable gas is generated such as a
temperature), electric shock, broken bones, injuries with
gas station, be sure to turn off the product. Do not charge the battery.
residual aftereffects from poisoning, etc., and injuries
Failure to do so might cause the gas to catch fire. In addition, when
requiring hospital admission for treatment or long-term
using the payment function of Osaifu-Keitai
hospital attendance as an outpatient.
to turn off the power in advance (If Osaifu-Keitai
This refers to injuries, burns (high- and low-temperature),
cancel the lock before turning off the power).
electric shock, etc. that do not require hospital admission for
Do not put the product in a cooking apparatus such as microwave
treatment or long-term hospital attendance as an outpatient.
oven or a pressure vessel. Doing so might cause ignition, rupture,
fault, fire or injury.
livestock, or pets.
Do not throw the product into a fire or heat it. Doing so might cause
ignition, rupture or fire.
Indicates that use in a place
Do not short-circuit the desktop holder contact terminals, microUSB
where the product is likely to
Indicates an action that is
connection terminals or headset connection terminals. Do not allow
get wet or allowing the
not allowed.
product to get wet is not
conductive foreign objects (metal fragments, pencil leads, etc.) to
No liquids
come into contact with or get inside the desktop holder contact
allowed.
terminals, microUSB connection terminals or headset connection
terminals. Doing so might cause fire, burns, a fault due to heat
Indicates that handling with
Indicates an action that
generation.
wet hands is not allowed.
must be done.
Do
When using a metal accessory, etc., take sure not to allow the metal part
Indicates that the power
Indicates that disassembly
come in contact with the microUSB connection terminals or power
plug must be disconnected
is not allowed.
outlet. Doing so might cause electric shock, ignition, injury or a fault.
Unplug
from the power outlet.
Do not expose the camera lens to direct sunlight for an extended
period. Doing so might cause ignition, rupture or fire by the light-
collecting mechanism of the lens.
The customer is not allowed to disassemble, modify or repair the
Danger
Be sure to read the following hazards before use.
product. Doing so might cause a fault, ignition, electric shock, or injury.
The Company is not liable even in the event of any nonconformities
arising on the product or peripheral devices as a result of modification,
Be sure to use only the specified peripheral devices. Use of other
etc. Modification of the product is in violation of the Wireless Telegraphy
peripheral devices might cause overheating, fire, rupture, fault, or
Act.
leakage of liquid.
Do not use, store or leave the product in hot places (e.g. by the fire,
Be sure to read the following warnings before
Warning
near a heater, under a kotatsu, in direct sunlight, in car in the hot sun).
use.
Doing so might cause ignition, rupture, fault, fire or injury.
Do not drop or subject to strong impact, such as throwing. Doing so
might cause rupture, overheating, fire, leakage or a fault.
d
Part
Material
Surface treatment
Do not put the product directly on the sand at a beach, etc. Sand or
Hardened glass
other small particles might get inside the earpiece/speaker,
AFP coating
microphone/speaker, second microphone etc. causing the volume to
drop. If sand gets inside the the product's main unit, it might cause
Stainless alloy
ー
overheating or a fault.
Aluminum alloy
Anodic oxide coating
When using the product for calling or data communication, be careful
not to keep the product in direct contact with your skin for a prolonged
PPS resin (Black,
ー
period, or not to cover the product with paper, cloth, bedding, etc.
Copper)
The main unit might get hot, causing fire, injury or a fault.
Nylon resin (White,
Silver Green)
■ Internal battery
Acrylic coating
(The internal battery of this product is a lithium-ion
Phosphorus bronze Gold plating
battery)
The internal battery is not fully charged at the time of
purchase. Charge the battery before using the product.
Do not bring the product close to magnetized objects such as cash
cards, floppy disks, credit cards, and prepaid cards. Doing so might
result in loss of recorded information.
Danger
Be sure to read the following hazards before use.
Do not allow liquids, metal objects, burnable items, and other foreign
matter to get inside the microUSB connection terminal, headset
connection terminal, microSD memory card/au Nano IC Card (LTE)
If the leaked liquid gets on your skin or clothes, immediately rinse it off
slot. Doing so might cause fire, electric shock, a fault or injury.
with water to avoid injury. If the liquid gets into your eyes, do not rub
but after wash your eyes with water, and immediately consult a doctor
Do not swing the product around by holding Sony mobile TV antenna
to avoid the risk of losing your eyesight. If the liquid gets on a device,
cable 02, the hand strap, etc. Doing so might cause an accident or
wipe it off without touching it.
damage.
The internal battery is a consumable item. If the performance of a
Use the product with the covers of the microUSB connection terminal,
battery does not recover (e.g. the usable time after each charge has
microSD memory card slot or au Nano IC Card (LTE) slot cover etc.
become extremely short), the battery is at the end of service life, so
closed. If the covers are open, dirt or water may get inside causing a
stop use. Failure to do so might cause overheating, fire, rupture or
fault.
leakage. Battery is built into the product. For repair, the product must
If you have a weak heart, be careful when setting the incoming vibration
be collected to au shop etc. and charges will be incurred. And you
and ringtone volume to prevent adverse effects on your heart.
may not use the product during certain period of time. Please be
forewarned. Note that the length of service life varies depending on
Pay attention to items becoming stuck to the main unit. The earpiece/
the usage condition, etc.
speaker, microphone/speaker uses magnets, and so thumbtacks and
pins, craft knife blades, staples, and other metal objects sometimes
become stuck to the main unit, and cause unexpected injury. Before using
the product, be sure to check that there are no foreign objects on the
earpiece/speaker, microphone/speaker.
k
Handling precautions
Be sure to read the following warnings before
Warning
These precautions are provided to ensure that performance can be fully
use.
demonstrated. Thoroughly read these precautions to ensure correct use.
■ Precautions common to the main unit, internal battery, charging
Sony Mobile TV antenna cable 02 is not waterproof. Do not use in
equipment, au Nano IC Card (LTE), peripheral devices
places subject to direct splashing with water, pet urine or other
liquids. Doing so might result in faults resulting from overheating, fire,
● Do not apply excessive force to the product during use. Be sure not to put
electric shock, or short-circuiting of electronic circuits.
the product into a tightly packed bag or place a heavy object on the
product in a bag. Sitting on the product in your pocket might damage the
Be sure to read the following cautions before
display or internal circuit board resulting in a malfunction.
Caution
use.
Keeping an external device connected to the microUSB connection
terminal or headset connection terminal might damage the connector
When the product is used by a child, parents or guardians should
resulting in a malfunction. Such damage and malfunction are not covered
teach the child how to use it. Do not allow them to use the equipment
by the warranty, even if there is no external damage.
without adult supervision. Failure to do so might cause injury.
● To ensure waterproof property (equivalent to IPX5 and IPX8) of this product,
If you feel any abnormality with your skin, immediately consult a
use the product with the microUSB connection terminal cover, microSD
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
memory card slot cover/au Nano IC Card (LTE) slot cover tightly closed.
depending on your physical constitution and condition.
Note that the waterproof property is not guaranteed in every usage
The materials of parts used on Sony Mobile TV antenna cable 02 are
condition. Do not allow water to get inside the product or splash water on
as follows.
charging equipment or optional accessories. Do not attach/remove the
microSD memory card or au Nano IC Card (LTE), or open/close the
Part
Material
Surface treatment
microUSB connection terminal cover in the rain or with waterdrops on the
Elastomer resin
−
surface of the product. Doing so might cause water intrusion resulting in
internal corrosion.
Malfunctions determined to be caused by water are not covered by the
Brass
Gold plating
warranty.
● Do not use the product in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5℃ to 35℃ and humidity
range of 35% to 85%)
・Charging equipment
・Peripheral devices
r
Do not use outside when you can hear thunder. Doing so might risk
lightning strikes and electric shock.
®
at a gas station, be sure
Do not let your hands, fingers and other parts of the body touch the
®
lock has been set,
desktop holder contact terminal, microUSB connection terminal or
headset connection terminal. Doing so might cause electric shock,
injury or a fault.
If the product is damaged because it is dropped or something, and its
display is cracked or internal parts are exposed, do not touch the
cracked display or exposed parts with your hands. Doing so might
cause electric shock or injury from damaged parts. Contact an au
shop or Keitai Guarantee Service Center.
If the wet product is charged, electric shock, short circuit, or corrosion
may occur and overheating may cause fire or malfunction or burns.
Although this product model has waterproof property, stop use if
liquid such as water gets inside the main unit from the microUSB
connection terminal, microSD memory card/au Nano IC Card (LTE)
slot. Continued use of the product in this state might cause
overheating, fire or a fault.
Do not operate the product while driving an automobile or motorized
bicycle, riding a bicycle or walking. Doing so may compromise traffic
safety and cause an accident.
If charging is not completed after the specified charging time, stop
charging. Failure to do so might cause leakage of liquid, overheating,
rupture or fire.
Do not leave in places within the reach of small children. Small
children might swallow small parts, etc. by mistake and choke on
them, or might drop them by mistake and cause accidents or injury.
e
f
■ Charging equipment
Be sure to read the following warnings before
Warning
use.
Do not use at other voltages than the specified power supply voltage.
Doing so might cause ignition, fire, overheating, electric shock or
injury.
AC adapter (sold separately): 100 VAC to 240 VAC (Connect to the
AC outlet for internal household use)
DC adapter (sold separately): 12/24 VDC (for negative ground vehicle
only)
When charging the product overseas, use AC Adapter for global use
(sold separately).
Firmly insert the plug of the specified charging equipment (sold
separately) into the power outlet or cigarette lighter socket down to
the base of its pins. Incomplete insertion of the power plug or
cigarette lighter socket might result in fire or injury caused by electric
shock, overheating or ignition. Do not use damaged adapters or loose
power outlets.
If a fuse of the Common DC Adapter 03 (sold separately) blows,
replace it with the specified fuse (250V, 1A). Using a fuse not
specified by the Company might cause overheating or fire. For
replacing fuses, check with the instructions of the Common DC
Adapter 03 (sold separately).
Do not damage, modify, twist, pull or place a heavy object on the
cable of the specified charging equipment (sold separately). Do not
use a damaged cable. Doing so might cause an electric shock, short
circuit, fire or injury.
Do not let your hands, fingers and other parts of the body touch the
desktop holder contact terminals or microUSB connection terminals.
Doing so might cause electric shock, injury or a fault.
If you hear thunder, do not touch the power plug. Doing so might
cause an electric shock etc. as a result of a lightning strike.
l
m
● Do not use the product in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5℃ to 35 ℃ and humidity
range of 35% to 85%. Temporary use within an ambient temperature range
of 36 ℃ to 40 ℃ and humidity range of 86% to 90% is allowed)
・Xperia
™
Z3 main unit
・au Nano IC Card (LTE) (attached to Xperia
™
Z3 main unit)
● Do not use in places subject to lots of dust or vibration. Doing so might
cause a fault.
● Clean the desktop holder contact terminal, microUSB connection terminal and
headset connection terminal with dry cotton swabs, etc. every now and then.
Soiled terminals might cause poor connection. Do not exert a strong force to
clean the desktop holder contact terminal, microUSB connection terminal or
headset connection terminal to prevent deformation.
● Clean the product with a soft dry cloth (such as the type used for
eyeglasses). Forceful rubbing with a dry cloth may scratch the display. The
display may be stained if splash or smear is left attached to the surface.
Wiping the product using alcohol, thinner, benzine, detergent, etc. might
erase the printing on the outer casing or cause discoloration.
● Use as far away as possible from land-line phones, TVs and radios. Use
nearby might affect them.
● This product may become warm while talking, watching TV, charging or
during other operations, depending on the situation, but this is not abnormal.
● When the product is used by a child, parents or guardians should
thoroughly read "Instruction Manual" and teach the child how to use it.
■ Main unit
● If the product becomes high temperature, the display may become dim.
This is normal.
● Do not forcefully press, tap or intentionally subject the display to strong
impact. Doing so might cause scratching or damage.
s
t