AU Xperia Z3 SOL26 기본 매뉴얼

{카테고리_이름} AU Xperia Z3 SOL26에 대한 기본 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AU Xperia Z3 SOL26 3 페이지.

페이지 인쇄

When using the product

・Communication is not possible even inside the service area in places where

the signal does not reach (e.g. tunnels and basements). Also,

communication is sometimes not possible in poor reception areas.

Communication is sometimes interrupted if you move into a poor reception

Be sure to read this manual before use

areas during communications.

・Since this product uses radio waves, the possibility of communication intercepts

by third parties cannot be eliminated (Though LTE/WiMAX 2+/CDMA/GSM/UMTS

system has highly secure confidential communication features).

・This product is compatible with the international roaming service. Each

SOL26

network service described in the manual varies depending on the area and

service content. For details, refer to the "Instruction Manual" (Japanese) app

installed on the product or " 取扱説明書（詳細版） (Full Instruction Manual)"

™

(Japanese) available on the au homepage.

Cautions on using Xperia

・Since this product is a radio station under the Radio Law, you may be asked

to temporarily submit the product for inspection in accordance with the Radio

Law.

・The IMEI information of your cell phone is automatically sent to KDDI COR-

PORATION for maintenance and monitoring operational status of your cell

phone.

・Since the battery is built into the product, you cannot replace it yourself. For

replacing the battery, contact an au shop or Customer Service Center.

・Take care not to inconvenience people around you when you use the product

in a public place.

・Company names and product names referred to in this manual are generally

・Before you start using the product overseas, check the relevant laws and

regulations of the country/region you visit.

trademarks or registered trademarks of respective companies. The TM, ®

marks may be omitted in this manual.

・When the product is used by a child, parents or guardians should thoroughly

read the "Basic Manual" and "Cautions on using Xperia

・In this manual, "Setting Guide", "Basic Manual", "取扱説明書（詳細版）(Full

Instruction Manual)" (Japanese), "Cautions on using Xperia

™

Z3", " 携帯電話

child how to use it.

機の比吸収率などについて(Radio Frequency (RF) exposure and Specific

■ Use of the product is not allowed in the following places!

Absorption Rate (SAR))" are collectively referred to as "Instruction Manual".

・Do not use a cell phone while driving a car or riding a motorbike or bicycle.

・In this manual, "microSD

™

memory card", "microSDHC

™

memory card" and

Failure to do so might cause a traffic accident. Use of a cell phone while

"microSDXC™ memory card" are abbreviated as "microSD memory card" or

driving a car or motorbike is prohibited by law. Use of a cell phone while

"microSD".

riding a bicycle may be punishable by some regulations.

™

・In this manual, "Xperia

Z3" is usually referred to as "the product".

・Use of cell phones on board is restricted. Follow the instructions of each air-

line.

September 2014, 1st Edition 1289-9032.1

When inserting an earphone, etc. into the product, adjust the volume

Be sure to read the following cautions before

Caution

to the proper level. Setting too loud a volume or using the earphone

use.

continuously for a long period of time might adversely affect your

ears. Also, raising the volume too high might prevent you from hearing

Do not store the product in places subject to direct sunlight (e.g. in

sounds around you, which might in turn lead to a traffic accident at a

automobiles), places that get hot, places that get extremely cold, and

railroad crossing or pedestrian crossing.

in humid or dusty places. Doing so might cause overheating, ignition,

When adjusting the volume with an earphone, etc. inserted into the

deformation or a fault.

product, raise the volume a little at a time. If you raise the volume too

Do not leave on unstable places such as rocky stands or tilting surfaces

much from the outset, sudden loud noise from the earphone, etc.

especially while the vibration mode set. Dropping the product may

might adversely affect your ears.

cause injury or damage. Also, pay sufficient attention to impact, etc.

When using an AC adapter or external device, insert/remove the

Do not cover or wrap the product with bedding, etc. while using or

connector straight to/from the terminal. Make sure the orientation of the

charging the product. Doing so might cause fire, fault or injury.

connector is correct. Failure to do so might cause damage or a fault.

■ Main unit

Do not touch the main unit or the specified AC adapter (sold

separately) for a long time while power is being supplied from an

external source. Doing so might cause low-temperature burns.

Danger

Be sure to read the following hazards before use.

The product may become hot by prolonged use especially in high-

temperature environment. Be careful when using the product touching

Do not puncture the product with a nail, hit with a hammer or step on

your skin for a long time, as it might cause low-temperature burns.

the product. Doing so might cause fire or damage.

Do not use power outlets or wiring apparatus beyond its rating. Also,

exceeding rating, for example, by connecting multiple devices to a

Do not disassemble, modify or directly solder the product. Doing so

single power strip might cause overheating and fire.

might cause spilling of the battery liquid resulting in an accident such

as loss of eyesight if it gets into eyes, or cause overheating, fire,

Do not place near corrosive chemicals or in places where corrosive

rupture or injury.

gas is generated. Doing so might cause a fault or loss of internal data.

Be careful not to have the product bitten by your pet. It might cause

Do not use if there is smoke, abnormal odor or noise, excessive

leakage of the internal battery, overheating, rupture, ignition, fire or

overheating, or other abnormalities. If an abnormality occurs,

injury.

disconnect the specified charging equipment (sold separately) from

the power outlet, make sure that the product is not overheating before

Be sure to read the following warnings before

turning the power off, and contact an au shop or Keitai Guarantee

Warning

use.

Service Center. Also, if you have dropped or damaged the product,

do not continue to use it in that state, and contact an au shop or Keitai

Do not use a cell phone while driving a car or riding a motorbike or

Guarantee Service Center.

bicycle. It might cause a traffic accident. Use of a cell phone while

driving a car or motorbike is prohibited by law. Use of a cell phone

while riding a bicycle may be punishable by some regulations.

Before cleaning the specified charging equipment (sold separately),

When unplugging the plug of the specified charging equipment (sold

unplug its power plug from the outlet or cigarette lighter socket. If the

separately) from the outlet or cigarette lighter socket, hold and pull the

plug remains plugged in when you clean the equipment, it might

power plug. If you pull the cable, the cable might be damaged.

cause an electric shock or short circuit.

Do not use Common DC Adapter 03 (sold separately) when the vehicle

Wipe off dust on the power plug. Failure to do so might cause fire,

engine is turned off. Doing so might cause drain the vehicle's battery.

burns or electric shock.

Do not use the desktop holder in a car. Doing so might disturb driving

Install and position in-car devices where they do not hinder driving or

and cause an accident. It is presumed that the desktop holder will be

safety equipment such as airbags. Failure to do so might cause a

used in the room and stable place.

traffic accident. Install in-car devices following the instructions of their

Pay attention to items becoming stuck to the Desktop Holder. The

manuals.

magnetic connector uses magnets, and so thumbtacks and pins, craft

Remove the power plug of the specified AC adapter (sold separately)

knife blades, staples, and other metal objects sometimes become

from the outlet or cigarette lighter socket when not using the adapter

stuck to the main unit, and cause unexpected injury. Before using the

for an extended period. Failure to do so might cause fire or a fault.

product, be sure to check that there are no foreign objects on the

magnetic connector or other parts.

Charging equipment is not waterproof. Do not use in places subject to

direct splashing with water, pet urine or other liquids. Doing so might

Do not bring magnetized objects such as cash cards, floppy disks,

result in faults or injury resulting from overheating, fire, electric shock,

credit cards, and prepaid cards close to the magnet connector of the

or short-circuiting of electronic circuits. In the event that the product is

desktop holder because magnets are used. Doing so might result in

splashed with liquid, immediately disconnect the power plug of the

loss of recorded information.

specified AC adapter (sold separately).

If you feel any abnormality with your skin, immediately consult a

dermatologist. Itching, rashes, eczema, etc. sometimes occurs

depending on your physical constitution and condition.

Be sure to read the following cautions before

Caution

The materials of parts used on the Desktop Holder are as follows.

use.

Part

Do not leave the desktop holder on the floor. Doing so might cause

Upper case, Lower case

injury or accident if they accidentally step on the holder or fall.

Attachment

Magnet connector

Do not use in humid places such as bath areas, or connect/

Contact terminal, microUSB

disconnect the specified charging equipment (sold separately) with

connection terminal

wet hands. Doing so might cause electric shock, a fault or injury.

Housing (contact terminal)

Housing (microUSB connection

Charge the battery in a stable place especially while the vibration

terminal)

mode set. If placed on an inclined surface or wobbly stand, the

Sheild (microUSB connection

product might fall causing injury or damage. Be careful especially

terminal)

when vibration is set. In addition, do not cover or wrap the product

Name plate

with a cloth or bedding. Doing so might cause fire, a fault or injury.

■ Pay attention to the place of use and volume of your voice!

・To prevent ringtone from bothering other people, not only refrain from making

a call but also power off or use Silent mode at a movie theater, theater,

museum, library, etc.

・In a city area, use in a place where you do not bother people walking.

・It is extremely dangerous to walk while looking at the screen of the cell

phone. Do not make calls or operate a cell phone while walking or by

stopping suddenly.

・Move to a place where you do not disturb others while you are in shinkansen,

a hotel lobby, etc.

・Be careful not to be loud while talking.

・Ask permission if you take photos with your cell phone camera.

■ Consider people around you!

・There may be a person with a cardiac pacemaker nearby at a place filled

with people such as in a crowded train. Set "Airplane mode" or turn off

beforehand.

・When a medical institution has laid down designated areas where use of the

product is prohibited or is not allowed to be brought in, abide by the

instructions of that medical institution.

Exemptions

◎ The Company is not liable for any damages arising from earthquakes,

lightning, storms, floods or other natural disasters, as well as fires, actions by

third parties, other accidents, intentional or mistaken misoperation by the

customer, or use under other unusual conditions outside the responsibility of

the Company.

™

Z3" and teach the

◎ The Company is not liable for any incidental damages (change/

disappearance of described content, loss of business income, disruption of

business, etc.) arising from use of or inability to use the product.

◎ The Company is not liable for any damages arising from failure to observe

the described content of the "Instruction Manual".

◎ The Company is not liable for any damages arising, for example, from

malfunction caused by combination with connected devices or software not

related to the Company.

Follow the instructions of each medical facility for the use of cell phones

on their premises. Power off the product in a place where the use is

prohibited. Failure to do so may affect electronic equipment and

electronic medical equipment. If the function that turns on automatically is

set, deactivate the setting.

Turn off the product or put it in Airplane mode before boarding an

airplane. Use of cell phones on board is restricted. Follow the

instructions of each airline. If the function that turns on automatically is

set, deactivate the setting. Failure to do so may adversely affect on-

board electronic equipment. Prohibited acts related to cell phone

usage on an airplane may be punished by law.

When using the product near an implanted pacemaker, implanted

cardioverter-defibrillator or other electronic medical device, radio

waves might affect these units and devices. So, please observe the

following.

1. Those with an implanted pacemaker or implanted cardioverter-

defibrillator should carry or use the product at least 15 cm away

from the implanted pacemaker or implanted cardioverter-

defibrillator.

2. Set the product to "Airplane Mode" or turn it off beforehand, if you

may not keep distance 15 cm or more such as when you cannot

move easily etc., since there may be people with an implanted

cardiac pacemaker or implanted cardioverter-defibrillator nearby.

3. Pay attention to the following points when using the product inside

medical institutions.

・ Do not bring the product into operating theaters, intensive-care

units (ICU) and coronary care units (CCU).

・ Turn the product off in hospital wards.

・ Even if you are in a lobby, etc., be sure to turn the product off

when there are electronic medical devices nearby.

・ When a medical institution has laid down designated areas where

use of the product is prohibited or is not allowed to be brought in,

abide by the instructions of that medical institution.

4. When using electronic medical devices other than an implanted

pacemaker and implanted cardioverter-defibrillator outside a

medical institution (e.g. home medical treatment), check

individually with the manufacturer of the electronic medical device

regarding the influence of radio waves.

Part

Material

Surface treatment

Serial number label

PET resin

2D barcode label

PS resin

Submergence label

Fine paper

Rubber foot

Polyurethane resin

■ au Nano IC Card (LTE)

Be sure to read the following warnings before

Warning

use.

Do not put the au Nano IC Card (LTE) in a cooking apparatus such as

a microwave oven or a pressure vessel. Doing so might cause

melting, overheating, fuming, loss of data or a fault.

Be sure to read the following cautions before

Caution

use.

Be careful not to injure your hand or finger when attaching/removing

the au Nano IC Card (LTE).

Use only the devices specified by the Company to insert the au Nano

IC Card (LTE) in. Using a device not specified by the Company might

cause loss of data or a fault. For the specified devices, contact an au

Material

Surface treatment

shop or Customer Service Center.

ABS resin

−

Do not disassemble or modify the au Nano IC Card (LTE). Doing so

PC resin

−

might cause loss of data or a fault.

Neodymium

Nickel plating

Do not use or leave the au Nano IC Card (LTE) in hot places such as

Brass

Gold plating

by the fire or a heater. Doing so might cause melting, overheating,

fuming, loss of data or a fault.

PA resin

−

Polyester resin

−

Do not throw the au Nano IC Card (LTE) into a fire or heat it. Doing so

might cause melting, overheating, fuming, loss of data or a fault.

Stainless

−

Do not touch the IC (metal) part of the au Nano IC Card (LTE) or short-

circuit it. Doing so might cause loss of data or a fault.

PET (aluminum

−

evaporation) resin

◎ Captured image data or downloaded data may sometimes be altered or lost

*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-

due to faults, repair or other handling of the product. The Company is not

liable for any damage or lost income resulting from recovery of these data.

◎ It is recommended you keep a copy of important data on your PC's hard disk,

etc. Whatever the cause of the defect or malfunction may be, the Company

*2 Minor injury:

assumes no responsibility for alteration or loss of saved data.

* "The Company" as appears in this manual refers to the following companies:

Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY

*3 Physical damage: This refers to extended damage to buildings, furniture,

Manufactured by: Sony Mobile Communications Inc.

■ Notice

■ Explanation of graphic symbols used in this manual

・Reproduction of the content of "Instruction Manual" in part or in whole is

prohibited.

・The content of "Instruction Manual" is subject to change without notice.

・Every effort has been made in the preparation of "Instruction Manual".

Should you notice any unclear points, omissions, etc., feel free to

Don't

Safety Precautions (Observe Strictly)

No wet

hands

■ Before using this product, thoroughly read these safety precautions

for proper use. After reading, store the precautions in a safe place.

No disassembly

● These "Safety Precautions" describe instructions that should be observed to

prevent damage to property or injury to the customer or others using the

■ Precautions common to the main unit, internal battery, charging

product.

equipment, au Nano IC Card (LTE), peripheral devices

● These instructions are divided into the following categories.

■ Explanation of indications used in this manual

Danger

This symbol indicates the potential and imminent

danger of death or serious injury

to a person.

This symbol indicates the possibility of death or serious

Warning

injury

to a person.

This symbol indicates the possibility of minor injury

Caution

a person or physical damage

Stay alert to your surroundings when calling, messaging, browsing

the Internet, shooting photos, playing games, watching TV or listening

Transparent plate (display, rear

to music. Failure to do so might cause a fall or traffic accident.

panel)

Decorative ring (camera)

When using a flash/photo light, do not lighten in front of person's eye.

Also, while a flash/photo light is turning on, do not look at lighting part

Power key, Volume key, Camera

directly. Doing so might cause disabilities such as decreased vision,

key

etc. Especially, do not shoot small children at close range.

Magnet connector (resin parts)

Do not lighten a flash/photo light toward a person who drives an

automobile, motorized bicycle or a bicycle. Doing so might cause

accidents by dazzling and disable to drive.

Sometimes, very rarely some people demonstrate symptoms such as

Magnet connector (sheet metal) SUS

temporary muscle spasms, loss of consciousness, etc. by watching

Magnet connector (electrode

repeatedly flickering screens. Those with a past history of this should

parts)

consult with a physician beforehand.

Be sure to read the following cautions before

Caution

use.

Use of the main unit in an automobile might sometimes affect on-

vehicle electronic devices, though this rarely happens. If this

happens, stop use since this may impair safe travel.

If you feel any abnormality with your skin, immediately consult a

dermatologist. Itching, rashes, eczema, etc. sometimes occurs

depending on your physical constitution and condition.

The materials of parts used on the product are as follows.

Part

Material

Surface treatment

Exterior case (top, bottom and

Aluminum alloy

Anodic oxide coating

side panels, microUSB

connection terminal cover,

microSD memory card/au Nano

IC Card (LTE) slot cover)

Exterior case (4 corners)

PA resin

ー

Exterior case (strap hole)

PA resin (with glass)

ー

Exterior case (headset

Nylon resin

ー

connection terminal)

Transparent plate (camera)

PMMA + PC resin

AR coating

■ Sony Mobile TV antenna cable 02

Do not drop the au Nano IC Card (LTE) or subject it to strong impact.

−

Doing so may cause a fault.

−

Do not fold, bend or place a heavy object on the au Nano IC Card

−

(LTE). Doing so may cause a fault.

−

Do not wet the au Nano IC Card (LTE). Doing so may cause a fault.

Do not scratch the IC (metal) part of the au Nano IC Card (LTE). Doing

so might cause a fault.

Do not store the au Nano IC Card (LTE) in dusty places. Doing so

might cause a fault.

Do not store the au Nano IC Card (LTE) in places exposed to direct

sunlight or hot and humid places. Doing so may cause a fault.

Store the au Nano IC Card (LTE) out of reach of small children. Failure

to do so might cause injury or asphyxiation, etc. if they accidentally

swallow and choke on it.

Connecting plug (body), cable,

headset connection terminal

(body)

Connecting plug (metal parts)

Before entering an area where flammable gas is generated such as a

temperature), electric shock, broken bones, injuries with

gas station, be sure to turn off the product. Do not charge the battery.

residual aftereffects from poisoning, etc., and injuries

Failure to do so might cause the gas to catch fire. In addition, when

requiring hospital admission for treatment or long-term

using the payment function of Osaifu-Keitai

hospital attendance as an outpatient.

to turn off the power in advance (If Osaifu-Keitai

This refers to injuries, burns (high- and low-temperature),

cancel the lock before turning off the power).

electric shock, etc. that do not require hospital admission for

Do not put the product in a cooking apparatus such as microwave

treatment or long-term hospital attendance as an outpatient.

oven or a pressure vessel. Doing so might cause ignition, rupture,

fault, fire or injury.

livestock, or pets.

Do not throw the product into a fire or heat it. Doing so might cause

ignition, rupture or fire.

Indicates that use in a place

Do not short-circuit the desktop holder contact terminals, microUSB

where the product is likely to

Indicates an action that is

connection terminals or headset connection terminals. Do not allow

get wet or allowing the

not allowed.

product to get wet is not

conductive foreign objects (metal fragments, pencil leads, etc.) to

No liquids

come into contact with or get inside the desktop holder contact

allowed.

terminals, microUSB connection terminals or headset connection

terminals. Doing so might cause fire, burns, a fault due to heat

Indicates that handling with

Indicates an action that

generation.

wet hands is not allowed.

must be done.

When using a metal accessory, etc., take sure not to allow the metal part

Indicates that the power

Indicates that disassembly

come in contact with the microUSB connection terminals or power

plug must be disconnected

is not allowed.

outlet. Doing so might cause electric shock, ignition, injury or a fault.

Unplug

from the power outlet.

Do not expose the camera lens to direct sunlight for an extended

period. Doing so might cause ignition, rupture or fire by the light-

collecting mechanism of the lens.

The customer is not allowed to disassemble, modify or repair the

Danger

Be sure to read the following hazards before use.

product. Doing so might cause a fault, ignition, electric shock, or injury.

The Company is not liable even in the event of any nonconformities

arising on the product or peripheral devices as a result of modification,

Be sure to use only the specified peripheral devices. Use of other

etc. Modification of the product is in violation of the Wireless Telegraphy

peripheral devices might cause overheating, fire, rupture, fault, or

Act.

leakage of liquid.

Do not use, store or leave the product in hot places (e.g. by the fire,

Be sure to read the following warnings before

Warning

near a heater, under a kotatsu, in direct sunlight, in car in the hot sun).

use.

Doing so might cause ignition, rupture, fault, fire or injury.

Do not drop or subject to strong impact, such as throwing. Doing so

might cause rupture, overheating, fire, leakage or a fault.

Part

Material

Surface treatment

Do not put the product directly on the sand at a beach, etc. Sand or

Hardened glass

other small particles might get inside the earpiece/speaker,

AFP coating

microphone/speaker, second microphone etc. causing the volume to

drop. If sand gets inside the the product's main unit, it might cause

Stainless alloy

ー

overheating or a fault.

Aluminum alloy

Anodic oxide coating

When using the product for calling or data communication, be careful

not to keep the product in direct contact with your skin for a prolonged

PPS resin (Black,

ー

period, or not to cover the product with paper, cloth, bedding, etc.

Copper)

The main unit might get hot, causing fire, injury or a fault.

Nylon resin (White,

Silver Green)

■ Internal battery

Acrylic coating

(The internal battery of this product is a lithium-ion

Phosphorus bronze Gold plating

battery)

The internal battery is not fully charged at the time of

purchase. Charge the battery before using the product.

Do not bring the product close to magnetized objects such as cash

cards, floppy disks, credit cards, and prepaid cards. Doing so might

result in loss of recorded information.

Danger

Be sure to read the following hazards before use.

Do not allow liquids, metal objects, burnable items, and other foreign

matter to get inside the microUSB connection terminal, headset

connection terminal, microSD memory card/au Nano IC Card (LTE)

If the leaked liquid gets on your skin or clothes, immediately rinse it off

slot. Doing so might cause fire, electric shock, a fault or injury.

with water to avoid injury. If the liquid gets into your eyes, do not rub

but after wash your eyes with water, and immediately consult a doctor

Do not swing the product around by holding Sony mobile TV antenna

to avoid the risk of losing your eyesight. If the liquid gets on a device,

cable 02, the hand strap, etc. Doing so might cause an accident or

wipe it off without touching it.

damage.

The internal battery is a consumable item. If the performance of a

Use the product with the covers of the microUSB connection terminal,

battery does not recover (e.g. the usable time after each charge has

microSD memory card slot or au Nano IC Card (LTE) slot cover etc.

become extremely short), the battery is at the end of service life, so

closed. If the covers are open, dirt or water may get inside causing a

stop use. Failure to do so might cause overheating, fire, rupture or

fault.

leakage. Battery is built into the product. For repair, the product must

If you have a weak heart, be careful when setting the incoming vibration

be collected to au shop etc. and charges will be incurred. And you

and ringtone volume to prevent adverse effects on your heart.

may not use the product during certain period of time. Please be

forewarned. Note that the length of service life varies depending on

Pay attention to items becoming stuck to the main unit. The earpiece/

the usage condition, etc.

speaker, microphone/speaker uses magnets, and so thumbtacks and

pins, craft knife blades, staples, and other metal objects sometimes

become stuck to the main unit, and cause unexpected injury. Before using

the product, be sure to check that there are no foreign objects on the

earpiece/speaker, microphone/speaker.

Handling precautions

Be sure to read the following warnings before

Warning

These precautions are provided to ensure that performance can be fully

use.

demonstrated. Thoroughly read these precautions to ensure correct use.

■ Precautions common to the main unit, internal battery, charging

Sony Mobile TV antenna cable 02 is not waterproof. Do not use in

equipment, au Nano IC Card (LTE), peripheral devices

places subject to direct splashing with water, pet urine or other

liquids. Doing so might result in faults resulting from overheating, fire,

● Do not apply excessive force to the product during use. Be sure not to put

electric shock, or short-circuiting of electronic circuits.

the product into a tightly packed bag or place a heavy object on the

product in a bag. Sitting on the product in your pocket might damage the

Be sure to read the following cautions before

display or internal circuit board resulting in a malfunction.

Caution

use.

Keeping an external device connected to the microUSB connection

terminal or headset connection terminal might damage the connector

When the product is used by a child, parents or guardians should

resulting in a malfunction. Such damage and malfunction are not covered

teach the child how to use it. Do not allow them to use the equipment

by the warranty, even if there is no external damage.

without adult supervision. Failure to do so might cause injury.

● To ensure waterproof property (equivalent to IPX5 and IPX8) of this product,

If you feel any abnormality with your skin, immediately consult a

use the product with the microUSB connection terminal cover, microSD

dermatologist. Itching, rashes, eczema, etc. sometimes occurs

memory card slot cover/au Nano IC Card (LTE) slot cover tightly closed.

depending on your physical constitution and condition.

Note that the waterproof property is not guaranteed in every usage

The materials of parts used on Sony Mobile TV antenna cable 02 are

condition. Do not allow water to get inside the product or splash water on

as follows.

charging equipment or optional accessories. Do not attach/remove the

microSD memory card or au Nano IC Card (LTE), or open/close the

Part

Material

Surface treatment

microUSB connection terminal cover in the rain or with waterdrops on the

Elastomer resin

−

surface of the product. Doing so might cause water intrusion resulting in

internal corrosion.

Malfunctions determined to be caused by water are not covered by the

Brass

Gold plating

warranty.

● Do not use the product in extremely hot, cold or humid places.

(Use within an ambient temperature range of 5℃ to 35℃ and humidity

range of 35% to 85%)

・Charging equipment

・Peripheral devices

Do not use outside when you can hear thunder. Doing so might risk

lightning strikes and electric shock.

at a gas station, be sure

Do not let your hands, fingers and other parts of the body touch the

lock has been set,

desktop holder contact terminal, microUSB connection terminal or

headset connection terminal. Doing so might cause electric shock,

injury or a fault.

If the product is damaged because it is dropped or something, and its

display is cracked or internal parts are exposed, do not touch the

cracked display or exposed parts with your hands. Doing so might

cause electric shock or injury from damaged parts. Contact an au

shop or Keitai Guarantee Service Center.

If the wet product is charged, electric shock, short circuit, or corrosion

may occur and overheating may cause fire or malfunction or burns.

Although this product model has waterproof property, stop use if

liquid such as water gets inside the main unit from the microUSB

connection terminal, microSD memory card/au Nano IC Card (LTE)

slot. Continued use of the product in this state might cause

overheating, fire or a fault.

Do not operate the product while driving an automobile or motorized

bicycle, riding a bicycle or walking. Doing so may compromise traffic

safety and cause an accident.

If charging is not completed after the specified charging time, stop

charging. Failure to do so might cause leakage of liquid, overheating,

rupture or fire.

Do not leave in places within the reach of small children. Small

children might swallow small parts, etc. by mistake and choke on

them, or might drop them by mistake and cause accidents or injury.

■ Charging equipment

Be sure to read the following warnings before

Warning

use.

Do not use at other voltages than the specified power supply voltage.

Doing so might cause ignition, fire, overheating, electric shock or

injury.

AC adapter (sold separately): 100 VAC to 240 VAC (Connect to the

AC outlet for internal household use)

DC adapter (sold separately): 12/24 VDC (for negative ground vehicle

only)

When charging the product overseas, use AC Adapter for global use

(sold separately).

Firmly insert the plug of the specified charging equipment (sold

separately) into the power outlet or cigarette lighter socket down to

the base of its pins. Incomplete insertion of the power plug or

cigarette lighter socket might result in fire or injury caused by electric

shock, overheating or ignition. Do not use damaged adapters or loose

power outlets.

If a fuse of the Common DC Adapter 03 (sold separately) blows,

replace it with the specified fuse (250V, 1A). Using a fuse not

specified by the Company might cause overheating or fire. For

replacing fuses, check with the instructions of the Common DC

Adapter 03 (sold separately).

Do not damage, modify, twist, pull or place a heavy object on the

cable of the specified charging equipment (sold separately). Do not

use a damaged cable. Doing so might cause an electric shock, short

circuit, fire or injury.

Do not let your hands, fingers and other parts of the body touch the

desktop holder contact terminals or microUSB connection terminals.

Doing so might cause electric shock, injury or a fault.

If you hear thunder, do not touch the power plug. Doing so might

cause an electric shock etc. as a result of a lightning strike.

● Do not use the product in extremely hot, cold or humid places.

(Use within an ambient temperature range of 5℃ to 35 ℃ and humidity

range of 35% to 85%. Temporary use within an ambient temperature range

of 36 ℃ to 40 ℃ and humidity range of 86% to 90% is allowed)

・Xperia

™

Z3 main unit

・au Nano IC Card (LTE) (attached to Xperia

™

Z3 main unit)

● Do not use in places subject to lots of dust or vibration. Doing so might

cause a fault.

● Clean the desktop holder contact terminal, microUSB connection terminal and

headset connection terminal with dry cotton swabs, etc. every now and then.

Soiled terminals might cause poor connection. Do not exert a strong force to

clean the desktop holder contact terminal, microUSB connection terminal or

headset connection terminal to prevent deformation.

● Clean the product with a soft dry cloth (such as the type used for

eyeglasses). Forceful rubbing with a dry cloth may scratch the display. The

display may be stained if splash or smear is left attached to the surface.

Wiping the product using alcohol, thinner, benzine, detergent, etc. might

erase the printing on the outer casing or cause discoloration.

● Use as far away as possible from land-line phones, TVs and radios. Use

nearby might affect them.

● This product may become warm while talking, watching TV, charging or

during other operations, depending on the situation, but this is not abnormal.

● When the product is used by a child, parents or guardians should

thoroughly read "Instruction Manual" and teach the child how to use it.

■ Main unit

● If the product becomes high temperature, the display may become dim.

This is normal.

● Do not forcefully press, tap or intentionally subject the display to strong

impact. Doing so might cause scratching or damage.